08 9258 8444
Cable Cabling Accessories Motor Accessories Dry Treat Lugs & Terminals Heat Shrinks Insulations & Insulators Brands

Cable Breakouts, End Caps and Repair Sleeves - PXE - Resin Filled Joints for Armoured and Unarmoured Power and Control Cables up to 1kV

Raychem’s PXE Resin Filled Joint Kits are ‘range-taking’ joint kits with few simple components for quick and simple installation of armoured and unarmoured cables up to 1kV. The PXE Resin Filled Joint Kits come with clear, robust, snap-together joint shells, two-part polyurethane resin in double chamber packs for enclosed mixing, core separator to ensure adequate clearance between conductors, abrasive cloth tape, sealant tape and a picture based installation instruction.

Where The PXE Resin Filled Joint Kits differ from the competitors is the Proprietary GUROFLEX which is a non-hazardous alternative filler to standard polyurethane. GUROFLEX needs no safety classification, is insensitive to installation temperature and can be removed at any time to allow joint re-entry if required.

Installation of the PXE Resin Filled Joint Kits is as straightforward as they come. The joint shells are trimmed to suit the cable size; the cable ends are prepared according to the instruction pictures; conductor connectors are fitted; the core separator is placed between the connectors; the joint shell is snapped closed over the joint and the ends are sealed; the filler material is mixed and poured. The cable can then be energised immediately after installation. The PXE Resin Filled Joint kits range with screw connectors have been fully type tested to European standard EN 50393

If you would like to know any more information about Raychem’s Resin Filled Joint Kits, you can download the Raychem Catalogue from the catalogue download section above. Alternatively if you wish to speak to one of our helpful staff you can call the number provided above or send an email through to sales@engsup.com.au.