Pre-Insulated Crimp Link Connectors

Pre-Insulated Crimp Link Connectors

In Stock

Utilux Pre-Insulated Crimp Link Connectors join two conductor ends inside one insulated barrel, forming a permanent crimped splice rather than a stud or plug-in connection.

Available colour-coded across the full range: Red 0.5mm²–1.5mm², Blue 1.5mm²–2.5mm², Yellow 2.5mm²–6.0mm².

P/N: UICLC

Add to quote
P/N: UICLC Category:

Description

Utilux Pre-Insulated Crimp Link Connectors

A crimp link connector joins two conductor ends inside one insulated barrel. This forms a permanent electrical splice rather than a stud, socket or plug connection. Utilux pre-insulated crimp link connectors come colour-coded across the full 0.5mm² to 6.0mm² conductor range, matching the standard red, blue and yellow colour coding used throughout this terminal range.

A crimping tool forms the joint, so installers need no heat source on site. Consequently, this connector suits general wiring repairs and extensions wherever a permanent, insulated splice is the goal, rather than a plug-in or stud connection.

Sizes and Colour Coding

Specifically, this range covers three colour-coded conductor sizes.

  • Red – 0.5mm² to 1.5mm²
  • Blue – 1.5mm² to 2.5mm²
  • Yellow – 2.5mm² to 6.0mm²

Applications

Installers use crimp link connectors to join two conductor ends permanently inside a junction box, panel or cable run. Typical jobs include extending an existing circuit or repairing a damaged cable, or joining two shorter cable runs into one longer run. Accordingly, this range covers the common conductor sizes found in general wiring and control circuits.

Correct crimping always requires a crimping tool matched to the conductor size. Additionally, installers should match the connector colour to the conductor size at each end of the splice, and check that both ends sit fully inside the barrel before crimping.

Utilux Pre-Insulated Crimp Link Connectors Australian Supply

Overall, Engineering Supplies stocks the full Utilux Terminals range. This includes ring, fork, pin, push-on, bullet, blade, cord end and link terminals, throughout Australia.

Contact Engineering Supplies for pricing, availability or technical assistance on (08) 9258 8444 or email sales@engsup.com.au.

Additional information

Conductor Size & Colour

0.5 – 1.5mm2 Red, 1.5 – 2.5mm2 Blue, 2.5 – 6.0mm2 Yellow

Related products

  • Single Cord End Teminals (Boot Lace)
    Utilux Terminals

    Single Cord End Teminals (Boot Lace)

    Single Cord End Terminals (boot lace ferrules) sleeve a stranded conductor for a secure fit in a screw or spring-cage terminal block, colour-coded to DIN 46228 from 0.5mm² to 35mm².

    Ten sizes available: 0.5mm² White through to 35mm² Beige, with pin lengths from 6mm to 16mm.

    P/N: UCET1

    P/N: UCET1
    View product
  • Placeholder
    Utilux Terminals

    Blade Terminals (Lipless)

    Utilux Blade Terminals (Lipless) push into a matching socket contact, with a plain flat blade and no raised locking lip.

    Available colour-coded: Red 0.5mm²–1.5mm², Blue 1.5mm²–2.5mm², both 28.5mm x 2.2mm blade, pack of 100.

    P/N: RLLBSGL

    P/N: RLLBSGL
    View product
  • Piggyback Adaptors
    Utilux Terminals

    Piggyback Adaptors

    Utilux Piggyback Adaptors, also called add-a-tab terminals, plug onto an existing male tab and present their own male tab in turn, so a second wire can join the same connection point without a separate splice or Y-lead.

    Available for conductors from 0.5mm² to 2.5mm², colour-coded Red and Blue to match conductor size, in a 6.3mm tab size.

    P/N: RPBSG6.3

    P/N: RPBSG6.3
    View product
  • Ring Terminals - 2.5 - 6.0mm2 Yellow
    Utilux Terminals

    Ring Terminals – 2.5 – 6.0mm2 Yellow

    Utilux Ring Terminals – 2.5–6.0mm², Yellow are crimp terminals with a closed ring end that bolts onto a stud or screw terminal, keeping the connection secure under vibration and movement.

    Available for conductors from 2.5mm² to 6.0mm², colour-coded Yellow, in Insulated, Supergrip and Uninsulated styles across stud sizes from 3mm to 16mm.

    P/N: URT3

    P/N: URT3
    View product