Motors & Rewinding
Engineering Supplies supplies electric motors and rewinding solutions for industrial, commercial and electrical applications.
Our range includes replacement motors, motor components and associated products, together with support for customers requiring motor identification, replacement selection and rewinding assistance.
Electric Motors & Rewinding
We can assist with a range of motor requirements, including:
- Replacement electric motors
- Single-phase and three-phase motors
- Industrial motor applications
- Motor identification and replacement selection
- Motor components and accessories
- Motor rewinding enquiries
- Replacement options for obsolete or damaged motors
When selecting a replacement motor, factors such as voltage, power rating, speed, frame size, mounting arrangement, shaft diameter and duty can all affect compatibility.
Therefore, providing the motor nameplate details, photos and key dimensions can help us identify a suitable replacement more accurately.
Engineering Supplies supports industrial customers, contractors, maintenance teams and equipment operators with product sourcing and technical assistance.
If you need help identifying an existing motor, contact our team with the motor nameplate information and application details.
Contact Engineering Supplies on (08) 9258 8444 or email sales@engsup.com.au for motor enquiries, replacement selection, pricing and availability.
Showing 1–16 of 32 resultsSorted by popularity
- Capacitors
BMI Type 92A AC Motor Start Capacitors
This capacitor is an AC motor start capacitor listed across four voltage bands from 125 Vac to 330 Vac.
- For example, replacing a BMI Type 92A start capacitor by matching the voltage band and capacitance band
- Also, motor start circuits already confirmed as needing a start capacitor rather than a run capacitor
- In particular, 330 Vac jobs where the old part included a resistor
P/N: MSC
- Rewinding
Nomex + Mylar + Nomex (NMN) Insulation
Indeed, NMN insulation is a laminated sheet material that sandwiches a polyester film core between two Nomex aramid paper layers, used as slot and phase insulation.
Specifically, 4 laminate combinations (2-2-2, 3-3-3, 3-5-3, 5-5-5) are available, giving thicknesses from 0.15mm to 0.38mm.
Also, pricing is per metre, with a quantity of 1 equal to 1 metre.
P/N: NMN
- Capacitors
450 Vac Motor Run Capacitors
This capacitor is available in 26 capacitance values from 1µF to 60µF.
- For example, replacing this unit by matching the microfarad value and voltage marking
- Also, motor rewind and maintenance work needing a specific capacitance from this wider range
- In particular, jobs already confirmed as needing a run capacitor rather than a start capacitor
P/N: MRC450
- Varnishes & Thinners
Ultimeg 2000/372 Varnish
This product is an electrical varnish for motor rewind and repair coating, available in four colours.
- For example, motor rewind and repair work needing a coating in a specific colour
- Also, jobs specifying the red grade in bulk, in 5L or 25L drums, rather than the 400ml spray
- In particular, general electrical winding and insulation coating work
P/N: ULT372
- Rewinding
Thermik Thermal Protectors (Micro-therms)
Indeed, these compact thermal cut-out devices (also known as Micro-therms) embed in motor windings to protect against overheating.
Specifically, two nominal response temperatures are available: 140°C and 150°C.
Also, the small size of a Micro-therm suits tight winding spaces where a larger protector would not fit.
P/N: TP
- Capacitors
400 Vac Motor Run Capacitors
This capacitor is available in 13 capacitance values from 16µF to 90µF.
- For example, replacing this unit by matching the microfarad value and voltage marking
- Also, motor rewind and maintenance work needing a specific capacitance from this range
- In particular, jobs already confirmed as needing a run capacitor rather than a start capacitor
P/N: MRC400
- Rewinding
Anti-Condensation Heaters
Indeed, these low-wattage strip heaters sit inside a motor enclosure to keep internal air above the surrounding dew point while idle.
Specifically, 8 wattages (21–99W) and 8 lengths (305–1702mm) are available.
Also, running a low continuous wattage is normally enough to prevent condensation without overheating the enclosure.
P/N: ACH
- Motor Fans & Bushes
Plastic Motor Fans
This product is a replacement cooling fan for motor repair work, available in eight diameter options.
- For example, replacing a worn or damaged fan during a motor repair
- Also, jobs needing a specific diameter to match the existing fan cover clearance
- In particular, repairs where the part number on the existing fan is unknown
SKU: CSF
- Motor Fans & Bushes
Plastic Motor Bushes
This product is a replacement fan bush for motor repair work, available in four internal-diameter options.
- For example, replacing a worn or damaged bush during a motor repair
- Also, jobs needing a specific internal diameter to match the motor shaft
- In particular, repairs where the fan and bush are being replaced as a pair
SKU: CSB
- Rewinding
Nomex Slot Wedges
Indeed, these aramid-paper wedges hold the winding in place and add insulation at the open end of a motor stator slot.
Specifically, 2 thicknesses (0.36mm, 0.48mm), 4 widths and 4 heights are available to match the slot being rewound.
Also, the aramid paper construction gives useful heat resistance in a thin, flexible wedge.
P/N: NPNSC
- Air Movement Motors
RCT85 Series Band Mount Shaft Up Evaporative Fan Motors With Extended Through Bolts (Cool Breeze)
Indeed, this is an Engineering Supplies RCT85 series replacement, supplied for direct fitment as described above.
Specifically, see the table above for the exact output, speed and price of each available variant.
P/N: RCTACB
- Rewinding
Triple Thermistors
Indeed, triple thermistors are temperature-sensing components embedded in motor windings to signal a control circuit when a set winding temperature is reached.
Specifically, they are supplied as a set of three (one per phase), in 13 nominal response temperatures from 90–180°C, with colour-coded leads.
P/N: TH
- Rewinding
Round Enameled Copper Magnet Wire
PE2 round enamelled copper magnet wire is supplied for winding and rewinding work. The catalogue range covers 56 diameters from 0.125 mm to 3.55 mm. Specify the insulation system and required reel quantity when enquiring.
SKU: PE2
Get a Quote
Contact us for pricing and availability by calling (08) 9258 8444 or emailing sales@engsup.com.au. - Varnishes & Thinners
Ultimeg 2000/380 Varnish
This product is an electrical varnish for motor rewind and repair coating, listed in a 25 litre drum.
- For example, motor rewind and repair work needing this varnish grade
- Also, confirming the exact grade and price before a large-volume order, given more than one grade shares this listing
- In particular, general electrical winding and insulation coating work
P/N: ULT380
- Varnishes & Thinners
Xylene Thinners
This product is a thinner for electrical varnish, listed in a single 20 litre pack.
- For example, thinning an electrical varnish ahead of a motor rewind coating job
- Also, general workshop use alongside a listed varnish grade from this range
- In particular, jobs where the coating manufacturer specifies this thinner by name
P/N: XTA
- Rewinding
DMD Slot Closures
Indeed, these Dacron–Mylar–Dacron laminate strips retain the winding and insulate the open end of a motor stator slot.
Specifically, 2 thicknesses (0.35mm, 0.45mm), 7 widths and 6 heights are available to match the slot being rewound.
Also, the laminate construction combines flexibility with useful dielectric strength in a thin cross-section.
P/N: DMDR
