Description
Cembre PEAR spiral drill bits are coated steel bits for rail drilling with Cembre LD series machines. The option listed here is the PE130AR, with a 13 mm drilling diameter. It forms part of the PE.AR range shown in Cembre’s rail catalogue.
Cembre PEAR spiral drill bits: key features
- PE130AR part number with a 13 mm drilling diameter.
- Avyac sharpening and a coated surface, as listed for the PE.AR range.
- Spiral bit design for use with the correct Cembre rail drill set-up.
PE130AR size and adaptor
| Detail | PE130AR |
|---|---|
| Drilling diameter | 13 mm |
| Catalogue adaptor | APEDW130 |
| DPE spacer | Without DPE spacer |
| Product family SKU | PEAR |
The adaptor and spacer details above come from the spiral-bit table in the Cembre rail catalogue. Before ordering, check them against your exact drill model and its operating instructions. This helps ensure that the bit, adaptor and drill form the correct assembly.
Choosing a rail drill bit
First, confirm the required hole diameter and the rail drilling task. Then check the drill model and the adaptor already fitted. Choose the 13 mm option here when PE130AR is the required part; do not select a bit by appearance alone.
For other options, view our Cembre PE spiral bits and CY broach cutters. These are separate ranges, so check their size and tool requirements for your job.
Product information and ordering support
See the official Cembre PE.AR product information for further size details. For help selecting a bit or confirming supply, contact Engineering Supplies on (08) 9258 8444 or email sales@engsup.com.au. Include the PE130AR part number and your rail drill model.
