Description
A socket clevis joins a ball connection to clevis hardware in a line assembly. This range includes SC120A and SC160A fittings with forged steel bodies and bolt connections. Their catalogue minimum failing loads are 120 kN and 160 kN respectively.
First, match the ball size and bolt diameter to the adjoining parts. Then check the clevis opening and drawing dimensions. The two models differ in connection size as well as load figure.
Socket clevis model comparison
| Specification | SC120A | SC160A |
|---|---|---|
| Stock SKU | DULSC120A | DULSC160A |
| Minimum failing load | 120 kN | 160 kN |
| Material | Forged steel | Forged steel |
| Ball dimension F | 16 mm | 20 mm |
| Bolt diameter | 16 mm | 20 mm |
| Clevis opening B | 20 mm | 24 mm |
| Dimension D | 22 mm | 24 mm |
| Dimension E | 28 mm | 35 mm |
| Dimension S | 59 mm | 62 mm |
Refer to the catalogue drawing for the measurement locations. For example, F identifies the ball connection size, while B identifies the gap inside the clevis. Also compare the mating fitting thickness with that opening.
Bolt and clip arrangements
The A suffix identifies the bolt version in the catalogue. Both models on this page use this arrangement. In addition, the Dulmison catalogue specifies a W clip for the standard socket fitting. It lists an R suffix when an R clip is required.
If your drawing calls for another clip or fastening arrangement, contact our team with the full part code. This helps confirm the required version before ordering.
- SC120A has a 16 mm ball connection and 16 mm bolt.
- SC160A has a 20 mm ball connection and 20 mm bolt.
- Both listed models have forged steel bodies.
- Check the clevis opening as well as the bolt diameter.
The minimum failing load is not a working load limit. Therefore, use the approved assembly design to confirm the required duty and connection sizes together.
Drawings and ordering help
See page 144 of the Engineering Supplies catalogue or page 12-6 of the Dulmison catalogue for the socket clevis dimensions and diagrams.
Select the required variation to order or request a quote. Alternatively, send us the stock SKU, quantity and assembly drawing for selection help. Call Engineering Supplies on (08) 9258 8444 or email sales@engsup.com.au.




