Description
LTDP75-3 parallel groove clamp for aluminium conductors
The LTDP75-3 parallel groove clamp is a line tap with parallel sides for aluminium and ACSR conductors. Its die-cast aluminium body accepts equal or unequal conductor sizes within the stated range. This model has galvanised steel hardware and is listed under SKU DULLTDP75-3.
Both the run and tap sides cover conductor diameters from 7.50 to 19.00 mm. As a result, you can compare the two conductors against the same diameter limits. Check the stranding as well as the outside diameter before placing an order.
LTDP75-3 specifications
- Clamp style: parallel groove line tap with parallel sides.
- Body material: die-cast aluminium.
- Hardware: galvanised steel.
- Run conductor stranding: 7/2.50 to 19/3.75.
- Tap conductor stranding: 7/2.50 to 19/3.75.
- Run and tap diameter: 7.50–19.00 mm.
- Overall length: 95 mm.
Check conductor metal and site conditions
Use the LTDP75-3 parallel groove clamp for aluminium or aluminium conductor steel reinforced (ACSR) conductors. For a copper connection, contact us to select the required plated version or a suitable bi-metal clamp. Confirm that choice before ordering for an aluminium-to-copper joint.
The manufacturer does not recommend this LTDP range for polluted or coastal locations. Therefore, include the installation location when seeking advice, along with the conductor metal, stranding and diameter. This helps us check the clamp against the intended use.
Ordering and product information
For dimensions and conductor details, see the Engineering Supplies catalogue and Dulmison LTDP data. Also check the applicable installation instructions for the joint before fitting the clamp.
Need an LTDP75-3 parallel groove clamp or help checking fit? Call (08) 9258 8444 or email sales@engsup.com.au. Quote DULLTDP75-3, the sizes of both conductors and the quantity required.
