Description
Termco Push On Terminals – 2.5–6.0mm² Yellow
Push on terminals, also called blade or spade terminals, crimp onto a stripped conductor and then push together to make the connection. Unlike a ring or fork terminal, no screw or bolt holds the joint. Termco yellow push on terminals suit stranded conductors from 2.5mm² to 6.0mm², matching the yellow colour code.
Generally, the male tab crimps onto one conductor and the matching female receptacle crimps onto the other. As a result, the two conductors connect and disconnect by hand, without re-crimping, whenever the joint needs to be separated for maintenance or replacement.
Male and Female Terminals, Tab Sizes and Insulation Styles
Specifically, this range covers both connector types:
- Male tab terminals
- Female receptacle terminals, sized to match
In addition, tab sizes in this range include:
- 2.8mm width, in 0.5mm and 0.8mm thicknesses
- 4.8mm width, in 0.5mm and 0.8mm thicknesses
- 6.3mm tabs
- 9mm tabs, the largest size in this range
Each combination is available in three insulation styles:
- Half Insulated — insulation over part of the crimp barrel
- Full Insulated — insulation covering the full crimp barrel
- Uninsulated — bare terminal for heat-shrink or other separate insulation
Applications
Installers use push on terminals for switchboard wiring, appliance and control panel connections, and any low-voltage circuit that needs a connector to be unplugged for servicing rather than unscrewed. Accordingly, this range covers the common tab sizes found on relays, contactors, switches and terminal blocks.
In all cases, correct crimping requires a ratchet crimping tool suited to insulated terminals in this conductor and colour range.
Termco Push On Terminals Australian Supply
Overall, Engineering Supplies stocks the full Termco insulated terminal range, including ring, fork, pin, push-on, blade and bullet terminals in the standard red, blue and yellow colour-coded sizes, throughout Australia.
Contact Engineering Supplies for pricing, availability or technical assistance on (08) 9258 8444 or email sales@engsup.com.au.
