Description
The SCAT-2838-A suspension trunnion clamp is for aluminium based conductors with a PLP catalogue diameter range of 28–38 mm. It has a cast aluminium body and hot dip galvanised fasteners. The stock SKU is PLPSCAT-2838-A.
The -A suffix identifies the suspension assembly with straps in PLP’s catalogue. First, confirm the required mounting arrangement. Then check the conductor size and the fittings specified in the line design.
Suspension trunnion clamp specifications
| Stock SKU | PLPSCAT-2838-A |
|---|---|
| Catalogue part number | SCAT-2838-A |
| PLP conductor diameter range | 28–38 mm |
| Conductor type | Aluminium based conductors |
| Body material | Cast aluminium |
| Fasteners | Hot dip galvanised |
| Catalogue configuration | Suspension assembly with straps |
However, the image shows the clamp detail and does not clearly show the complete suspension strap arrangement. Confirm the supplied assembly with Engineering Supplies if your order depends on the exact strap or mounting configuration.
Conductor support and protection
PLP distinguishes a trunnion clamp used with a support bracket from a suspension assembly supplied with straps. Therefore, specify the full SCAT-2838-A code when requesting this suspension version.
PLP also recommends armour rods with bolted suspension clamps to protect the conductor at the support point. Check the required rod set and the complete conductor assembly against the approved design before installation.
- Cast aluminium body for aluminium based conductors.
- Hot dip galvanised fasteners.
- 28–38 mm conductor range in the PLP catalogue.
- -A suffix for the suspension strap assembly.
For selection help, provide the conductor type, outside diameter and mounting drawing. In addition, include details of any specified armour rods. This gives our team the information needed to check the correct clamp and associated hardware.
Catalogue and ordering
Refer to page 32 of the PLP distribution catalogue for the conductor range, materials and strap options. You can also browse our line hardware range for related fittings.
Finally, choose the required quantity and add the clamp to your cart, or request a quote. Alternatively, contact Engineering Supplies with the SKU and assembly details. Call (08) 9258 8444 or email sales@engsup.com.au.
