Cable Accessories
Showing 33–48 of 96 resultsSorted by popularity
SleevingVidaflex SD550 Silicone Glass Sleeving
Vidaflex SD550 Silicone Glass Sleeving provides flexible high-temperature electrical insulation for cables, winding leads and electrical equipment.
The sleeving uses a braided E-glass fibre core with a smooth silicone elastomer coating, providing Class H insulation for continuous operation from -60°C to +180°C, with short-term exposure up to 250°C.
Available from 2mm to 25mm internal diameter.
Electrical Strength: 4.0kV
Temperature Class: Class H / 180°C
P/N: SRGS
Raytech Fillers – Electrical Insulating & Sealing CompoundsRaytech Magic Power Gel – Electrical Insulating & Sealing Gel
Raytech Magic Power Gel is a two-component electrical insulating and sealing gel supplied in a convenient single twin-compartment bottle.
The highly adhesive, self-amalgamating gel flows around electrical connections before cross-linking and remains re-enterable and reusable for future maintenance.
Provides IP68 protection in suitable enclosures, dielectric strength above 20kV/mm and an operating range from -60°C to +200°C.
Available in 250ml, 500ml and 1L sizes.
P/N: POWER
Raytech Casting JointsRaytech Magic Joint – Straight Cable Joint
Raytech Magic Joint is an IP68 straight cable joint system for 0.6/1kV extruded cables.
The kit uses a tough two-piece enclosure filled with fast-setting Raytech Magic Gel, creating a sealed yet re-enterable joint for underground, pit, duct and submerged installations.
Available for copper cables up to 1000mm² single core and selected aluminium cable applications.
Voltage: 0.6/1kV
Protection: IP68
P/N: MAGICJS
Wiring DuctKSS Wiring Duct Lids
This product is a replacement cover for compatible KSS slotted wiring duct sizes, available in nine widths.
- For example, replacing a worn, damaged or missing cover on an existing duct run
- Also, jobs needing extra covers for a new duct installation
- In particular, panels where technicians open and close the cover regularly for maintenance
SKU: SDL
Raytech Pre-Filled JointsReady Box IP68
Indeed, Ready Box IP68 is a Raytech pre-filled gel junction box that protects multi-cable connections in wet or submerged locations.
Specifically, it comes with 3 cable entrances in an IP68-rated housing.
Also, the gel fill means installers need no mixing or curing on site.
P/N: READY
Cable Ties316 Stainless Steel Cable Ties – Self-Locking
316 Stainless Steel Cable Ties provide a strong, corrosion-resistant fastening solution for demanding electrical, industrial and outdoor applications.
The self-locking roller design secures cable bundles without a separate locking component, while the 316 stainless construction suits applications where conventional nylon ties may not provide enough strength or environmental resistance.
Available in 4.6mm standard and 7.9mm heavy-duty widths, with lengths from 100mm to 680mm.
P/N: SS Series
Pack Qty: 100
Bushings, Plugs and GrommetsKSS Hole Plug
This product is a plug for closing an unused panel opening, listed by size.
- For example, closing an unused cut-out left over from a panel modification
- Also, switchboards, control panels and electrical enclosures
- In particular, jobs needing a clean, finished appearance over a redundant opening
P/N: HP
Termco Heat ShrinkTermco Dual Wall Heat Shrink
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: DWLR
Raytech Pre-Filled JointsBravo System
Indeed, Bravo System is a Raytech pre-filled gel joint for small conductor cable connections.
Specifically, 2 model lines (Bravo, MiniBravo) cover cable cross-sections from 1.0mm² to 6.0mm².
Also, Engineering Supplies stocks both as single units or in 3-piece packs.
P/N: BRAVO
Raytech Pre-Filled JointsSuperClik
Indeed, SuperClik is a Raytech pre-filled gel joint that protects straight and in-line cable connections.
Specifically, 4 sizes are available, for cable diameters up to 30mm and connections from 1.5mm² to 16mm².
Also, the housing comes pre-filled with gel, so installers need no mixing or curing on site.
P/N: SUPERCLIK
Raytech Fillers – Electrical Insulating & Sealing CompoundsSky Plast
This product is a mouldable insulating rubber that hand-shapes around a connection to insulate and protect it, available in two pack sizes.
- For example, insulating and sealing a low voltage cable joint or connection
- Also, jobs needing a hand-mouldable rubber rather than a poured or injected gel
- In particular, repairs where a rubber-based mechanical characteristic suits the installation better than a gel
SKU: SKY
Raytech Pre-Filled JointsClik Fire
Indeed, Clik Fire is a Raytech pre-filled gel joint for through and branch cable connections.
Specifically, over 20 size combinations cover through diameters from 16mm to 36mm and branch diameters from 10mm to 29mm.
Also, branch formations range from 1 to 4 conductors, from 1.5mm² up to 185mm².
P/N: CLIK
SleevingAcrylic Glass Sleeving
This sleeving is an acrylic-coated glass fibre sleeve for insulated conductors and electrical equipment, available in yellow.
- For example, insulating conductors inside switchboards or control panels
- Also, general electrical equipment needing a coloured identification sleeve
- In particular, jobs specifying a smaller 10m pack rather than a full roll
P/N: ACS
Cable TiesKSS Assorted Cable Tie Pack
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: CVBP850
Cable TiesKSS Marker Ties
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: MCV
Cable Tie MountsKSS Wall Plug Mount
This product is a wall-plug fixing point for cable ties, listed by size with its plug length and mounting hole.
- For example, fixing points into masonry or plasterboard walls
- Also, jobs needing a longer plug for a deeper fixing
- In particular, matching the tie window to the cable tie width in use
P/N: CH