Cable Accessories
Showing 17–32 of 96 resultsSorted by popularity
Heat ShrinksRaychem Breakout Gloves
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: 302K
Corrlok Conduit and FittingsCorrlok Medium Duty Conduit Straight Fittings
This product is a straight, medium-duty conduit fitting for a cable entry point, available in IP66 or IP68.
- For example, forming a straight-through cable entry point on an enclosure
- Also, choosing IP68 where a higher level of ingress protection is specified
- In particular, matching this fitting to the correct locknut for a complete assembly
P/N: CLCM
Heat ShrinksTermco Heat Shrinkable Cable Repair Sleeve
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: HSWAS
Heat ShrinksTermco Thin Wall Heat Shrink Rolls
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: HS
Bushings, Plugs and GrommetsKSS Snap Bushing
KSS Snap Bushings protect electrical cables, wires and other lines as they pass through holes in metal panels, chassis and electrical enclosures.
Manufactured from UL94V-2 rated Nylon 66, the bushings snap firmly into the mounting hole to cover raw panel edges and provide a smooth cable-entry surface.
Available for mounting holes from 7.9mm to 63mm.
P/N: SB Series
Cable ClipsKSS Nylon Cable Clamp (P Clip)
Indeed, the nylon cable clamp clamps cable bundles from 3.1mm to 36.7mm diameter with a nylon P clip.
- Screw-mounted nylon P-clip fixing for round cable or bundles
- Diameters from small control cable (3.1mm) up to large bundles (36.7mm)
- Installations needing a nylon clamp rather than a nail-through or steel clip
Packed 100 to a box.
Heat ShrinksTermco Medium Wall Heat Shrink Lengths
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: MWL
Heat ShrinksRaychem WCSM Heavy Wall Heat Shrink Tubing
Raychem WCSM Heavy Wall Heat Shrink Tubing provides robust electrical insulation, sealing and mechanical protection for power cables and cable accessories.
Manufactured from UV-stabilised cross-linked polyolefin, WCSM offers a greater than 3:1 shrink ratio and suits low-voltage insulation as well as sealing and rejacketing on low-, medium- and high-voltage cable systems.
Available in a wide range of sizes from WCSM16/4 to WCSM180/50.
P/N: WCSM
Raytech Fillers – Electrical Insulating & Sealing CompoundsRaytech Magic Gel – Electrical Insulating & Sealing Gel
Raytech Magic Gel is a two-component electrical insulating and sealing gel for cable joints, junction boxes and electrical enclosures.
Its low-viscosity formula flows around conductors and components before cross-linking, while the cured gel remains re-enterable for future maintenance.
Provides IP68 protection when used in a suitable enclosure, with dielectric strength above 20kV/mm and an operating temperature range from -60°C to +200°C.
Available in 300ml, 1L, 2L and 10L sizes.
P/N: MAGIC
Liquatite Conduit and FittingsPremium Grade Liquid Tight Ferrules
This product is a ferrule for terminating this range’s conduit, listed by conduit size.
- For example, terminating the matching conduit at a fitting or enclosure
- Also, matching this ferrule to the correct locknut for a complete assembly
- In particular, jobs assembling a full conduit run from individual components
P/N: LTF
Split ConduitSplit Conduit
This product is a covering for cables and cable bundles, available in ten inside-diameter sizes, each with its own set of length options.
- For example, covering a cable or wiring bundle along its length
- Also, jobs needing a specific inside diameter to match the bundle being covered
- In particular, longer cable runs needing one of the extended length options
SKU: SC
Raytech Fillers – Electrical Insulating & Sealing CompoundsRaytech Wonder Gel – Ready-to-Use Electrical Insulating Gel
Raytech Wonder Gel is a ready-to-use, single-component electrical insulating and sealing gel for cable joints, junction boxes and electrical enclosures.
The gel comes already cross-linked, so there is no mixing and no curing wait time. In addition, it remains soft and re-enterable for future inspection or maintenance.
Provides dielectric strength above 20kV/mm and can contribute to IP68 protection when installed in a suitable enclosure.
Available in 280ml cartridges.
P/N: WONDER / WONDER-INV
Raytech Pre-Filled JointsGel Cover Line
Indeed, Gel Cover Line is a Raytech pre-filled gel cover that protects housed connector splices for small conductor sizes.
Specifically, 2 connector types are available (Bar 3-way, Ohm 2-way), each for 4–6mm² conductors.
Also, single units and multi-packs of 9 or 11 pieces are both available.
P/N: GEL
Liquatite Conduit and FittingsPremium Grade Liquid Tight Locknuts
This product is a locknut for securing this range’s conduit fittings, in metric threads.
- For example, securing a matching ferrule fitting in place
- Also, completing a conduit assembly alongside the conduit and ferrule
- In particular, jobs assembling a full conduit run from individual components
P/N: LNB
Cable Ties316 Stainless Steel Cable Ties – Polyester Coated
316 Stainless Steel Cable Ties with Polyester Coating provide a strong fastening solution for electrical, industrial, rail, mining and outdoor cable-management applications.
The SSC Series combines 316 stainless steel construction with a black, non-toxic halogen-free polyester coating and self-locking roller mechanism.
Available in 4.6mm and 7.9mm widths, with lengths from 100mm to 680mm.
P/N: SSC Series
Colour: Black
Pack Qty: 100
Cable Tie MountsKSS Self Adhesive Tie Mount
This product is a self-adhesive fixing point for cable ties, listed by base size with its cable tie window.
- For example, fixing points on a flat, clean surface where drilling isn’t wanted
- Also, jobs needing the extra security of a mounting hole in addition to the adhesive base
- In particular, matching the tie window to the cable tie width in use
P/N: HC10