Description
The TBCC-160-1 clevis clevis turnbuckle is a galvanised forged steel fitting with a clevis connection at each end. It has an M20 bolt size and a listed adjustment range of 480–600 mm. The stock code on this page is PLPTBCC-160-1.
Use it where the line assembly calls for an adjustable clevis/clevis fitting. First, check the specified end connections. Then compare the required assembly length with the catalogue range before placing an order.
Clevis clevis turnbuckle specifications
| Stock SKU | PLPTBCC-160-1 |
|---|---|
| Catalogue part number | TBCC-160-1 |
| End connections | Clevis / clevis |
| Material and finish | Galvanised forged steel |
| Bolt size | M20 |
| Listed range | 480–600 mm |
| Catalogue load figure | 160 kN |
Engineering Supplies lists the 160 kN figure under minimum failing load; PLP labels it as the catalogue rating. It is not a stated working load limit. Therefore, use the approved assembly design to confirm the required duty.
Check the connection and adjustment range
This model has two clevis ends and an open central body. The listed range runs from a minimum of 480 mm to a maximum of 600 mm. Also check the mating fittings so the bolt size and connection layout suit the complete assembly.
- Confirm that both ends require a clevis connection.
- Check the M20 bolt size against the mating fittings.
- Compare the required fitted length with the listed range.
- Quote the full stock SKU when ordering.
If a drawing specifies another connection type, send it to our team for review. This helps identify the required fitting without relying on a product photograph alone.
Catalogue and ordering
Refer to page 145 of the Engineering Supplies catalogue or page 7-12 of the PLP hardware and fittings catalogue. You can also browse our line hardware range for related fittings.
Select the M20 variation to order or request a quote. Alternatively, contact Engineering Supplies with the part number, quantity and assembly drawing. Call (08) 9258 8444 or email sales@engsup.com.au.
