Description
LTD75-1 parallel groove clamp with interlocking fingers
The LTD75-1 parallel groove clamp is an aluminium line tap with interlocking fingers and stainless steel hardware. It accepts equal or unequal combinations of aluminium and ACSR conductors within its stated range. The ordering option on this page is LTD75-1, listed under SKU DULLTD75-1.
Its die-cast aluminium body uses interlocking fingers to increase contact with the conductors. Both the run and tap sides accept diameters from 8.90 to 18.80 mm. First, check each cable against these limits, since the two conductors may have different sizes.
LTD75-1 specifications
- Style: Type LTD parallel groove clamp with interlocking fingers.
- Body: die-cast aluminium.
- Hardware: stainless steel.
- Run stranding: 19/1.78 to 19/3.75.
- Tap stranding: 19/1.78 to 19/3.75.
- Run and tap diameter: 8.90–18.80 mm.
- Overall length: 95 mm.
- Clamp arrangement: two-bolt Type LTD.
Check the model and conductor material
The photo shows a three-bolt Type LTX clamp from the same family. In contrast, the LTD75-1 parallel groove clamp offered here is the two-bolt, 95 mm model. Therefore, use the part number and specifications to confirm the required item before ordering.
This version is for aluminium and aluminium conductor steel reinforced (ACSR) conductors. However, for a copper connection, contact us to check the required plated version or a suitable bi-metal clamp. Also confirm the site conditions: the manufacturer does not recommend this range for polluted or coastal locations.
Product data and ordering support
See the Engineering Supplies catalogue and Dulmison interlocking clamp data for the model range. If your specification calls for parallel sides instead, compare the LTDP clamp and its separate conductor limits.
Need help selecting an LTD75-1 parallel groove clamp? Call (08) 9258 8444 or email sales@engsup.com.au. To help us check fit, include both conductor sizes, the site location and the quantity required.
