Dulmison AUP112 parallel clamp for aluminium conductors

Paralel Clamp (Type AUP – for aluminium only)

In Stock

Dulmison AUP112 parallel clamp is for aluminium conductors only. It has a cast aluminium alloy body and stainless steel hardware, with an 18.80–29.30 mm run range and an 11.30–21.00 mm tap range by overall conductor diameter.

Ordering SKU: DULAUP112. Check the separate stranding ranges below before selecting the clamp.

$165.45 ex. GST

Add to quote
P/N: AUP Category:
ThumbnailVariation TitleP/NPriceQuantityAdd To Cart
Paralel Clamp (Type AUP – for aluminium only)
Run range: 19/3.75 to 61/3.25
Run-od range mm: 18.80 to 29.30
Tap range: 7/3.75 to 37/3.00
Tap-od range mm: 11.30 to 21.00
 DULAUP112 $165.45
View quote list

Description

The Dulmison AUP112 is a parallel clamp for aluminium conductors only. Its aluminium alloy body uses stainless steel hardware to clamp the run and tap conductors within separate size ranges. Engineering Supplies lists this item under SKU DULAUP112.

Dulmison AUP112 conductor ranges

  • Run stranding: 19/3.75 to 61/3.25.
  • Run overall diameter: 18.80–29.30 mm.
  • Tap stranding: 7/3.75 to 37/3.00.
  • Tap overall diameter: 11.30–21.00 mm.

The run and tap openings suit different cable ranges. First, check the main run conductor against its limits. Then check the tap conductor separately. Both the stranding and overall diameter need to match the selected clamp.

Construction and features

  • Cast aluminium alloy body.
  • Stainless steel hardware.
  • Spaced U-bolts along the clamp body.
  • Tapered bell-mouth cable entries.
  • Modified V-groove conductor channels.
  • Listed weight of 1.22 kg each.

The catalogue describes the groove and U-bolt layout as helping to limit cold flow and cable chafing. Cold flow is the movement of the conductor material under sustained pressure. The tapered entries also guide the cable into the clamp body.

Check the part before ordering

Use AUP112 when checking the catalogue part number and DULAUP112 when ordering this listed item. Also confirm that both conductors are aluminium and fall within the stated ranges.

If you are matching an existing clamp, send us its markings and the conductor details. We can help compare the required part before you place the order. Ask for the applicable installation instructions when planning the connection.

Catalogue and related connectors

For the size table and body details, see page 2-8 of the Dulmison catalogue hosted by Engineering Supplies. The same range is listed on printed page 120 of our Engineering Supplies catalogue.

You can also browse our bolted connections and terminals for other connection types.

Order and product support

Select DULAUP112 from the table above and enter the required quantity. For product help, call (08) 9258 8444 or email sales@engsup.com.au with your run and tap conductor sizes.

Additional information

Run Range

19/3.75 to 61/3.25

Run-OD Range mm

18.80 to 29.30

Tap Range

7/3.75 to 37/3.00

Tap-OD Range mm

11.30 to 21.00

Related products

  • STC110 service tee connector with copper conductor
    Bolted Connections & Terminals

    Service Tee Connectors (Type STC)

    Dulmison STC110-3 service tee connector is used with a B24 line tap for copper-to-aluminium service connections. It has galvanised steel hardware, a 7/2.75 copper conductor and a total length of 385 mm.

    Run conductor range: 7/2.50–19/3.75 · Ordering SKU: DULSTC110-3.

    $67.85 ex. GST
    P/N: STC
    View product
  • ABC5-2 aluminium bail clamp with copper loop
    Bolted Connections & Terminals

    Aluminium Bail Clamp (Type ABC)

    ABC5-2 aluminium bail clamp has an ABC5 series body, aluminium hardware and a copper loop for overhead line connections. It suits 6.75–18.80 mm overall conductor diameters and comes pre-filled with Alminox.

    Part number: ABC5-2 · Product group SKU: ABC.

    $52.99 ex. GST
    P/N: ABC
    View product
  • Bi-metal parallel groove clamps in two sizes
    Bolted Connections & Terminals

    Parallel Groove Clamps – Bi-metal

    Bi-metal parallel groove clamps for joining an aluminium run to a copper tap. The forged aluminium body has a copper insert, galvanised steel bolts, Belleville washers and an oxide inhibitor coating.

    • Blue marking identifies the copper connection.
    • Five part-number options with different conductor ranges.
    • Check each side of the joint separately before ordering.

    For 3919-FS and 3909-FS, contact us to confirm the aluminium conductor range before purchase. Call (08) 9258 8444 or email sales@engsup.com.au.

    Price range: $26.86 through $77.75 ex. GST
    P/N: PGCBM
    View product
  • Aluminium parallel groove clamp with two bolts
    Bolted Connections & Terminals

    Parallel Groove Clamp – Aluminium

    Aluminium parallel groove clamp for aluminium-to-aluminium conductor joints. Choose from five sizes with galvanised steel bolts, Belleville washers and an oxide inhibitor coating.

    • 3929-FS: 16–70 mm².
    • 3931-FS: 16–120 mm².
    • 3932-FS: 25–150 mm².
    • 3594-FS: 35–240 mm².
    • PGA35303: 35–300 mm²; three-bolt model.

    Check the diameter and torque table below before ordering. Photos show a representative two-bolt clamp. For help, call (08) 9258 8444 or email sales@engsup.com.au.

    Price range: $17.45 through $63.39 ex. GST
    P/N: PGCA
    View product