Shop Electrical Supplies Online
Showing 161–176 of 491 resultsSorted by popularity
Motor Fans & BushesPlastic Motor Fans
This product is a replacement cooling fan for motor repair work, available in eight diameter options.
- For example, replacing a worn or damaged fan during a motor repair
- Also, jobs needing a specific diameter to match the existing fan cover clearance
- In particular, repairs where the part number on the existing fan is unknown
SKU: CSF
- Motor Fans & Bushes
Plastic Motor Bushes
This product is a replacement fan bush for motor repair work, available in four internal-diameter options.
- For example, replacing a worn or damaged bush during a motor repair
- Also, jobs needing a specific internal diameter to match the motor shaft
- In particular, repairs where the fan and bush are being replaced as a pair
SKU: CSB
- Flexible Cable
Single Core Flexible 0.6/1kV Cable 10-70mm2
Single Core Flexible 0.6/1kV Cable 10-70mm² (ZBD) is a heavier single-conductor flexible cable for switchboard and equipment wiring needing a larger conductor size.
- 10mm² to 70mm² sizes
- 0.6/1kV voltage rating
- 6 core colours
- Raytech Pre-Filled Joints
Bravo System
Indeed, Bravo System is a Raytech pre-filled gel joint for small conductor cable connections.
Specifically, 2 model lines (Bravo, MiniBravo) cover cable cross-sections from 1.0mm² to 6.0mm².
Also, Engineering Supplies stocks both as single units or in 3-piece packs.
P/N: BRAVO
- Crimping Tools
CRIMPFOX 10S
Phoenix Contact CRIMPFOX 10S crimping pliers form a square crimp on 0.14–10 mm² ferrules with or without an insulating collar. The compact 175 mm tool has side entry and a releasable pressure lock.
Order number: 1212045
SKU: PC1212045 - Line Hardware
Socket Tongue
ST70 socket tongue with a cast iron body, M16 bolt size and 70 kN minimum failing load. Catalogue dimensions include a 16 mm ball connection and an 18 mm tongue hole.
Order stock SKU DULST70. The standard catalogue fitting uses a W clip; contact us if a different clip is required. For selection help, call (08) 9258 8444.
- TE Cable Clamps/Cleats
TE Cable Cleats (Single)
This product is a single-cable product for individual cable support, available in seven cable-diameter bands, mostly with SN mounting.
- For example, supporting an individual cable on an overhead or underground run
- Also, jobs needing a specific diameter band to match the finished cable outside diameter
- In particular, installations needing FM rather than SN mounting on the two bands where it’s offered
SKU: TECC
- Utilux Crimping Tools
Utilux UT#22 Crimper – 6–120mm² Copper Lugs & Links
Utilux UT#22 Crimper is a heavy-duty hand-operated mechanical tool for 6–120mm² uninsulated copper lugs and links.
The built-in selectable die set allows the required crimp size to be selected directly on the tool, eliminating the need to carry separate loose dies within its specified range.
Produces a hexagonal crimp and is ideal for electrical contracting, switchboards, industrial maintenance, utilities and field work.
Range: 6–120mm²
Crimp Type: Hexagonal
Length: 670mm
Reference: UT#22 / #22 - Utilux Crimping Tools
UT#114
Utilux UT#114 is a ratchet crimping tool for boot lace ferrule terminals, covering conductors from 10-35mm².
P/N: UT-114
- Cleaners
Acidic Cleaner (Previously known as Eff-Erayza)
Indeed, the acidic cleaner is a DryTreat Stain Proof product, previously Eff-Erayza. It targets deposits such as efflorescence, limescale and grout haze on surfaces that are not sensitive to acid.
- Efflorescence removal from stone, tile and masonry
- Limescale and grout haze on non-acid-sensitive surfaces
- Mineral deposit removal ahead of resealing
Available in 1qt/946ml.
- Switch Panel and Board
Paper Phenolic Insulating Switch Panel
Paper Phenolic Switch Panel is a full-sheet paper phenolic panel for switchboard work, in 4.5mm to 15mm thicknesses.
P/N: SPS
- Rewinding
Nomex Slot Wedges
Indeed, these aramid-paper wedges hold the winding in place and add insulation at the open end of a motor stator slot.
Specifically, 2 thicknesses (0.36mm, 0.48mm), 4 widths and 4 heights are available to match the slot being rewound.
Also, the aramid paper construction gives useful heat resistance in a thin, flexible wedge.
P/N: NPNSC
- High Temperature Cable
Betatherm Single Core Cable
This cable is a single-core high temperature cable in several conductor areas and colours, from 0.25mm² to 6mm².
- For example, jobs specifying Betatherm by conductor area and colour
- Also, installations needing a colour-coded high temperature single core rather than yellow-only cable
- In particular, sites wanting a choice of 100m or 200m roll lengths
P/N: BC
- Raytech Pre-Filled Joints
SuperClik
Indeed, SuperClik is a Raytech pre-filled gel joint that protects straight and in-line cable connections.
Specifically, 4 sizes are available, for cable diameters up to 30mm and connections from 1.5mm² to 16mm².
Also, the housing comes pre-filled with gel, so installers need no mixing or curing on site.
P/N: SUPERCLIK
- Raytech Fillers – Electrical Insulating & Sealing Compounds
Sky Plast
This product is a mouldable insulating rubber that hand-shapes around a connection to insulate and protect it, available in two pack sizes.
- For example, insulating and sealing a low voltage cable joint or connection
- Also, jobs needing a hand-mouldable rubber rather than a poured or injected gel
- In particular, repairs where a rubber-based mechanical characteristic suits the installation better than a gel
SKU: SKY
