Shop Electrical Supplies Online
Showing 177–192 of 491 resultsSorted by popularity
Raytech Pre-Filled JointsClik Fire
Indeed, Clik Fire is a Raytech pre-filled gel joint for through and branch cable connections.
Specifically, over 20 size combinations cover through diameters from 16mm to 36mm and branch diameters from 10mm to 29mm.
Also, branch formations range from 1 to 4 conductors, from 1.5mm² up to 185mm².
P/N: CLIK
- Cable Markers
Critchley Z-Type Cable Markers (symbols)
Indeed, Critchley ZS symbols (Critchley Z-Type Cable Markers) are clip-on cable markers for identifying cables, conductors and equipment.
Specifically, the symbols +, – and / are available across four marker sizes (9, 11, 13 and 15), matched to cable diameters from 2.4–6.3mm. Also, each size and symbol combination is sold separately.
P/N: ZSPLUS
- Sleeving
Acrylic Glass Sleeving
This sleeving is an acrylic-coated glass fibre sleeve for insulated conductors and electrical equipment, available in yellow.
- For example, insulating conductors inside switchboards or control panels
- Also, general electrical equipment needing a coloured identification sleeve
- In particular, jobs specifying a smaller 10m pack rather than a full roll
P/N: ACS
- Cable Ties
KSS Assorted Cable Tie Pack
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: CVBP850
- Cable Ties
KSS Marker Ties
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: MCV
- Cable Tie Mounts
KSS Wall Plug Mount
This product is a wall-plug fixing point for cable ties, listed by size with its plug length and mounting hole.
- For example, fixing points into masonry or plasterboard walls
- Also, jobs needing a longer plug for a deeper fixing
- In particular, matching the tie window to the cable tie width in use
P/N: CH
- Cable Markers
KSS FM Cable Markers (symbols)
KSS FM symbols (KSS FM Cable Markers) are pre-printed cable markers for identifying cables, conductors and equipment.
Specifically, individual symbols (., +, – and /) are available in packs of 500, so installers can stock the characters they use most often.
P/N: FMPLUS
Pack Size: 500 markers - Utilux Terminals
Heavy Duty Ring Terminals Black
Utilux Heavy Duty Ring Terminals – Black are heavy-duty crimp terminals with a closed ring end and a larger barrel for bigger cable sizes, using the Supergrip crimp style for extra pull-out strength.
Available in stud sizes 5mm and 6mm, across a range of barrel sizes to suit different cable diameters.
P/N: UHDRT
- Utilux Terminals
Fork Terminals – 1.5 – 2.5mm2 Blue
Utilux Fork Terminals – 1.5–2.5mm², Blue are crimp terminals with an open, Y-shaped fork end that slides under a stud or screw terminal without full nut removal, suiting connections that need periodic disconnection.
Available for conductors from 1.5mm² to 2.5mm², colour-coded Blue, in Insulated (4mm, 5mm and 6mm stud) and Supergrip (3mm, 4mm and 5mm stud) styles.
P/N: UFT2
- Termco Terminals
Bullet Terminals – 2.5 – 6.0mm2 Yellow
Termco Bullet Terminals (2.5–6.0mm² Yellow) are crimp terminals for stranded conductors from 2.5 to 6.0mm². The round bullet pin and matching socket connect and disconnect by hand, without a screw or bolt.
Sold as separate Male (pin) and Female (socket) terminals, so each half can be ordered to suit the mating connector already in place.
P/N: TVAB5
- Termco Terminals
Bullet Terminals – 1.5 – 2.5mm2 Blue
Termco Bullet Terminals (1.5–2.5mm² Blue) are crimp terminals for stranded conductors from 1.5 to 2.5mm². The round bullet pin and matching socket connect and disconnect by hand, without a screw or bolt.
Sold as separate Male (pin) and Female (socket) terminals, so each half can be ordered to suit the mating connector already in place.
P/N: TVAB2
- Termco Terminals
Bullet Terminals – 0.5 – 1.5mm2 Red
Termco Bullet Terminals (0.5–1.5mm² Red) are crimp terminals for stranded conductors from 0.5 to 1.5mm². The round bullet pin and matching socket connect and disconnect by hand, without a screw or bolt.
Sold as separate Male (pin) and Female (socket) terminals, so each half can be ordered to suit the mating connector already in place.
P/N: TVAB1
- Crimping Tools
CRIMPFOX-SC 6
Phoenix Contact CRIMPFOX-SC 6 crimping pliers form a B crimp on uninsulated slip-on sleeves in 2.8, 4.8 and 6.3 mm sizes. Three marked die stations cover 0.5–6 mm² conductors, with shaped handles and a releasable pressure lock.
Order number: 1212050
SKU: PC1212050 - Universal Tools
SF-CCK 9
SF-CCK 9 Cabinet Key is a metal key covering several control-cabinet closure profiles on one tool.
P/N: PC1212525
- Screwdrivers
SZF 1-0,6X3,5
The Phoenix Contact SZF 1-0,6X3,5 is an actuation tool for ST terminal blocks that also works as a slotted screwdriver. It has a 0.6 × 3.5 × 100 mm blade, two-component handle and 181 mm overall length. Manufacturer part 1204517.
