Shop Electrical Supplies Online
Showing 145–160 of 491 resultsSorted by popularity
- Crimping Tools
CRIMPFOX 6
Phoenix Contact CRIMPFOX 6 crimping pliers form a trapezoidal crimp on 0.25–6 mm² ferrules with or without an insulating collar. The 198 mm tool has five marked die stations, side entry and shaped two-component handles.
Order number: 1212034
SKU: PC1212034 - Earth Rod Pits
Concrete Valve Box – GALVCVB1
GALVCVB1 Concrete Valve Box provides a robust, accessible enclosure for earthing and electrical connection points. Concrete construction with overall dimensions of 300mm x 260mm x 115mm.
- Earth Rods & Accessories
Earth Rod Clamp GRC5
The GRC5 earth rod clamp suits one 10–35 mm² conductor parallel to a 13–15 mm diameter earth rod. It has a high-copper-content alloy body with a set-screw connection. Engineering Supplies part ER-GRC5.
- Wire Accessories
Single Eye Cable Stocking Galvanised
Single Eye Cable Stocking (Galvanised) is a woven wire mesh grip for pulling or supporting a cable under tension.
Available in twelve size bands from 6.0mm to 180mm cable diameter.
P/N: CSSE
- Rewinding
Anti-Condensation Heaters
Indeed, these low-wattage strip heaters sit inside a motor enclosure to keep internal air above the surrounding dew point while idle.
Specifically, 8 wattages (21–99W) and 8 lengths (305–1702mm) are available.
Also, running a low continuous wattage is normally enough to prevent condensation without overheating the enclosure.
P/N: ACH
- Marine Cable
Tinned Marine Battery & Starter Cable
Marine Battery Starter Cable is a tinned single-core battery cable for boats, in B&S 8, 3 and 2.
P/N: MBS
- Marine Cable
Extra Low Voltage Single Core Tinned Copper Wire
Tinned Single Core Wire is a single-conductor tinned wire for extra-low-voltage marine wiring, in 3mm to 6mm sizes.
P/N: MSS
- Automotive Cable
Multi Core Trailer Automotive Cable
Multi Core Trailer Automotive Cable (ATC) bundles multiple colour-coded conductors in one jacket, for trailer wiring looms carrying several lighting and accessory circuits together.
- 3, 5 or 7-core configurations
- 2mm, 2.5mm, 3mm and 4mm industry-equivalent sizes
- 30m, 100m and 500m roll lengths
- Raytech Pre-Filled Joints
Ready Box IP68
Indeed, Ready Box IP68 is a Raytech pre-filled gel junction box that protects multi-cable connections in wet or submerged locations.
Specifically, it comes with 3 cable entrances in an IP68-rated housing.
Also, the gel fill means installers need no mixing or curing on site.
P/N: READY
- Cable Ties
316 Stainless Steel Cable Ties – Self-Locking
316 Stainless Steel Cable Ties provide a strong, corrosion-resistant fastening solution for demanding electrical, industrial and outdoor applications.
The self-locking roller design secures cable bundles without a separate locking component, while the 316 stainless construction suits applications where conventional nylon ties may not provide enough strength or environmental resistance.
Available in 4.6mm standard and 7.9mm heavy-duty widths, with lengths from 100mm to 680mm.
P/N: SS Series
Pack Qty: 100 - Bushings, Plugs and Grommets
KSS Hole Plug
This product is a plug for closing an unused panel opening, listed by size.
- For example, closing an unused cut-out left over from a panel modification
- Also, switchboards, control panels and electrical enclosures
- In particular, jobs needing a clean, finished appearance over a redundant opening
P/N: HP
- Utilux Terminals
Bullet Terminals – 0.5 – 1.5mm2 Red
Utilux Red Bullet Terminals join two conductors with a round pin and matching socket, sold as separate male and female halves for the 0.5mm² to 1.5mm² conductor range.
Available as Male (pin) or Female (socket) halves, each sold and priced separately.
P/N: UBT1
- Termco Copper Lugs
Termco Copper Stalk Lugs
Termco Copper Stalk Lugs provide a crimped copper cable termination with a solid stalk connection for compatible electrical equipment and clamp terminals.
The TCLS range is electro-tinned and available for copper conductors from 35mm² to 120mm², with 8mm, 10mm and 16mm stalk sizes.
- Termco Terminals
Push On Terminals – 1.5 – 2.5mm2 Blue
Termco Push On Terminals (1.5–2.5mm² Blue) are quick-connect crimp terminals for stranded conductors from 1.5 to 2.5mm². They push together without screws or solder.
Available as Male tabs and matching Female receptacles, in Half Insulated, Full Insulated and Uninsulated styles. Accordingly, tab sizes cover 2.8mm and 4.8mm widths plus the 6.3mm size.
P/N: TVP02
- Termco Heat Shrink
Termco Dual Wall Heat Shrink
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: DWLR














