Shop Electrical Supplies Online
Showing 225–240 of 491 resultsSorted by popularity
4WD & Off-Road JacksTitan Terrain Cover Bag – Rugged Floor Jack & Mounting Bracket
Protective 300D Oxford cloth cover bag for the Titan Terrain Rugged Floor Jack, waterproof and UV resistant with a secure rear strap and buckle.
P/N: TTRFJ-3TBAG
- 4WD & Off-Road Jacks
Titan Terrain Flat-Type Tall Extension – Rugged Floor Jack Upgrade
Flat-type tall extension upgrade for Titan Terrain 1.5T/2T/3T Rugged Floor Jacks – adds 60mm of lift height with a 78mm wide top opening for chassis rails, ideal for heavily lifted 4x4s.
- 4WD & Off-Road Jacks
Titan Terrain RFJ Spare Tyre Mounting Bracket – Universal Gear Carrier
Universal spare-wheel mounting bracket for carrying a Titan Terrain Rugged Floor Jack and recovery gear on the spare tyre. Heavy-duty steel, adjustable 108–155mm, fits 5 and 6-bolt stud patterns.
- 4WD & Off-Road Jacks
Titan Terrain 2T RFJ Mounting Bracket – Jack Mount for 2 Tonne Jack
Mounting bracket for the Titan Terrain 2 Tonne Rugged Floor Jack – aluminium construction, clip-lock latch, anti-rattle strap and pre-drilled mounting holes.
P/N: TTRFJB-2000
- 4WD & Off-Road Jacks
Titan Terrain 3T RFJ Mounting Bracket – Jack Mount for 3 Tonne Jack
Mounting bracket for the Titan Terrain 3 Tonne Rugged Floor Jack – powder-coated aluminium, vertical or horizontal mounting, built-in jack pole grooves and padlock provision. Includes 4x M10 stainless bolts and nuts.
- 4WD & Off-Road Jacks
Titan Terrain 3 Tonne Rugged Floor Jack – Hi-Vis Yellow Edition
Titan Terrain 3 Tonne Rugged Floor Jack in the Hi-Vis Yellow reflective edition – 3,000kg rated capacity with extension, 715mm maximum lift height, solid nylon wheels and full-length skid plate for 4WDs, utes, fleet vehicles and workshop use.
- Earth Rod Pits
ERB3 Polymer Concrete Earth Pit
ERB3 Polymer Concrete Earth Pit provides protected and accessible housing for earth rods, conductors and earthing clamps. In addition, the ERB3 features a hinged inspection lid, side cable entry points and a durable polymer concrete enclosure.
- Cembre Hand Tools
Cembre HNKE16 Crimping Tool – Ferrules 4–16mm²
Cembre HNKE16 Mechanical Crimping Tool from the CRIMPSTAR® range for wire ferrules and end sleeves from 4–16mm².
The manual tool produces a trapezium crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Suitable for both bare and pre-insulated end sleeves, with dedicated crimp positions for 4, 6, 10 and 16mm².
Crimp Range: 4–16mm²
Crimp Profile: Trapezium
Weight: 491g
P/N: HNKE16 - Cembre Hand Tools
Cembre HNKE4 Crimping Tool – Ferrules 0.5–4mm²
Cembre HNKE4 Mechanical Crimping Tool from the CRIMPSTAR® range for wire ferrules and end sleeves from 0.5–4mm².
The compact manual tool produces a trapezium crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Ideal for control panels, switchboards, instrumentation wiring and general flexible conductor termination.
Crimp Range: 0.5–4mm²
Crimp Profile: Trapezium
Weight: 516g
P/N: HNKE4 - Cembre Hand Tools
Cembre HNN3 Crimping Tool – Pre-Insulated Terminals 1.5–10mm²
Cembre HNN3 Mechanical Crimping Tool from the CRIMPSTAR® range for pre-insulated electrical terminals and connectors from 1.5–10mm².
The compact manual crimper produces an indent crimp and features treated steel jaws, a factory-set ratchet mechanism, automatic release after completing the crimp and an emergency release lever.
Suitable for compatible Cembre pre-insulated terminals, including 10mm² ANE-P flat pin terminals such as ANE2-P12, commonly referenced in Australia as PC10.
Crimp Range: 1.5–10mm²
Crimp Profile: Indent
Weight: 491g
P/N: HNN3 - Cembre Hand Tools
Cembre HN5 Crimping Tool – Uninsulated Terminals 10–16mm²
Cembre HN5 Mechanical Crimping Tool from the CRIMPSTAR® range for uninsulated electrical terminals and connectors from 10–16mm².
The manual tool produces an indent crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Suitable for compatible 10mm² and 16mm² Cembre uninsulated terminals, including the A-P flat pin range commonly referenced in Australia as PCU10 and PCU16.
Crimp Range: 10–16mm²
Crimp Profile: Indent
Weight: 489g
P/N: HN5 - Cembre Hand Tools
Cembre HN1 Crimping Tool – Uninsulated Terminals 0.25–10mm²
Cembre HN1 Mechanical Crimping Tool from the CRIMPSTAR® range for uninsulated electrical terminals and connectors from 0.25–10mm².
The manual tool uses an indent crimp profile and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Suitable for applications including the 10mm² Cembre A2-P12 uninsulated pin connector, commonly referenced in Australia as PCU10.
Crimp Range: 0.25–10mm²
Crimp Profile: Indent
Weight: 480g
P/N: HN1Cembre specifies the HN1 for non-insulated electrical connectors from 0.25–10mm², with indent crimp geometry and manual operation.
- Cembre Hand Tools
Cembre HNKE50 Mechanical Crimping Tool 25–50mm²
Cembre HNKE50 Mechanical Crimping Tool from the CRIMPSTAR® range for crimping 25, 35 and 50mm² wire ferrules and end sleeves.
The compact manual tool produces a trapezium crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Crimp Sizes: 25 / 35 / 50mm²
Crimp Profile: Trapezium
Weight: 590g
P/N: HNKE50 - Cembre Terminals & Connectors
Cembre Uninsulated Pin Connectors – PCU10 to PCU70
Cembre Uninsulated Pin Connectors – PCU Series provide flat pin terminations for copper conductors from 10mm² to 70mm².
Commonly identified in Australia as PCU10, PCU16, PCU25, PCU35, PCU50 and PCU70, these genuine Cembre terminals correspond to the manufacturer’s A-P uninsulated flat pin range.
PCU10 – A2-P12 – 10mm²
PCU16 – A3-P14 – 16mm²
PCU25 – A5-P16 – 25mm²
PCU35 – A7-P20 – 35mm²
PCU50 – A10-P25 – 50mm²
PCU70 – A14-P30 – 70mm²Manufactured from tinned electrolytic copper with an uninsulated barrel for compatible switchgear, terminal and electrical equipment connections.
Type: Uninsulated Flat Pin Connector
- Cembre Terminals & Connectors
Cembre Insulated Pin Connectors – PC10, PC16, PC25 & PC35
Cembre Insulated Pin Connectors – PC Series for flexible copper conductors from 10mm² to 35mm².
Commonly identified in Australia as PC10, PC16, PC25 and PC35, these genuine Cembre insulated pin terminals correspond to the manufacturer’s ANE-P range.
Australian P/N / Cembre P/N:
PC10 – ANE2-P12 – 10mm²
PC16 – ANE3-P14 – 16mm²
PC25 – ANE5-P16 – 25mm²
PC35 – ANE7-P20 – 35mm²Black PA6.6 insulation with a tinned copper terminal body and funnel-entry design.
Type: Insulated Pin Connector
- Utilux SL Aluminium Lugs
Utilux SL68M16 Aluminium Lug – M16 Rail Terminal Lug
Utilux SL68M16 Aluminium Terminal Lug is an M16 palm version of the Utilux SL68 compression lug used in railway and overhead electrical applications.
Additionally, the SL-series design uses an extruded aluminium compression barrel with pre-filled jointing compound and suits compatible AAC, AAAC and ACSR conductor applications.
Ideal where the project or railway specification calls specifically for Utilux SL68M16.
Palm Connection: M16
Connection Type: Compression
SKU: SL68M16
