Cembre Hand Tools
Engineering Supplies offers Cembre hand tools for professional electrical and industrial applications, including screwdrivers, pliers, cutters, spanners, ratchets and related tooling.
Browse the available Cembre hand tool range below or contact our team for product selection and technical support.
Showing all 9 resultsSorted by popularity
Cembre Hand ToolsCembre HNKE16 Crimping Tool – Ferrules 4–16mm²
Cembre HNKE16 Mechanical Crimping Tool from the CRIMPSTAR® range for wire ferrules and end sleeves from 4–16mm².
The manual tool produces a trapezium crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Suitable for both bare and pre-insulated end sleeves, with dedicated crimp positions for 4, 6, 10 and 16mm².
Crimp Range: 4–16mm²
Crimp Profile: Trapezium
Weight: 491g
P/N: HNKE16
Cembre Hand ToolsCembre HNKE4 Crimping Tool – Ferrules 0.5–4mm²
Cembre HNKE4 Mechanical Crimping Tool from the CRIMPSTAR® range for wire ferrules and end sleeves from 0.5–4mm².
The compact manual tool produces a trapezium crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Ideal for control panels, switchboards, instrumentation wiring and general flexible conductor termination.
Crimp Range: 0.5–4mm²
Crimp Profile: Trapezium
Weight: 516g
P/N: HNKE4
Cembre Hand ToolsCembre HNN3 Crimping Tool – Pre-Insulated Terminals 1.5–10mm²
Cembre HNN3 Mechanical Crimping Tool from the CRIMPSTAR® range for pre-insulated electrical terminals and connectors from 1.5–10mm².
The compact manual crimper produces an indent crimp and features treated steel jaws, a factory-set ratchet mechanism, automatic release after completing the crimp and an emergency release lever.
Suitable for compatible Cembre pre-insulated terminals, including 10mm² ANE-P flat pin terminals such as ANE2-P12, commonly referenced in Australia as PC10.
Crimp Range: 1.5–10mm²
Crimp Profile: Indent
Weight: 491g
P/N: HNN3
Cembre Hand ToolsCembre HN5 Crimping Tool – Uninsulated Terminals 10–16mm²
Cembre HN5 Mechanical Crimping Tool from the CRIMPSTAR® range for uninsulated electrical terminals and connectors from 10–16mm².
The manual tool produces an indent crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Suitable for compatible 10mm² and 16mm² Cembre uninsulated terminals, including the A-P flat pin range commonly referenced in Australia as PCU10 and PCU16.
Crimp Range: 10–16mm²
Crimp Profile: Indent
Weight: 489g
P/N: HN5
Cembre Hand ToolsCembre HN1 Crimping Tool – Uninsulated Terminals 0.25–10mm²
Cembre HN1 Mechanical Crimping Tool from the CRIMPSTAR® range for uninsulated electrical terminals and connectors from 0.25–10mm².
The manual tool uses an indent crimp profile and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Suitable for applications including the 10mm² Cembre A2-P12 uninsulated pin connector, commonly referenced in Australia as PCU10.
Crimp Range: 0.25–10mm²
Crimp Profile: Indent
Weight: 480g
P/N: HN1Cembre specifies the HN1 for non-insulated electrical connectors from 0.25–10mm², with indent crimp geometry and manual operation.
Cembre Hand ToolsCembre HNKE50 Mechanical Crimping Tool 25–50mm²
Cembre HNKE50 Mechanical Crimping Tool from the CRIMPSTAR® range for crimping 25, 35 and 50mm² wire ferrules and end sleeves.
The compact manual tool produces a trapezium crimp and features treated steel jaws, a factory-set ratchet mechanism and an emergency release lever.
Crimp Sizes: 25 / 35 / 50mm²
Crimp Profile: Trapezium
Weight: 590g
P/N: HNKE50
Cembre Hand ToolsCembre HNN4 Mechanical Crimping Tool 10–16mm²
The Cembre HNN4 Mechanical Crimping Tool is a professional CRIMPSTAR® hand crimper designed for pre-insulated electrical connectors from 10 to 16mm².
Featuring an indent crimp profile, treated steel jaws and a factory-set ratchet mechanism, the compact HNN4 provides controlled manual crimping for professional electrical installation and maintenance applications.
P/N: HNN4
Get a Quote
Contact us for pricing and availability by calling (08) 9258 8444 or emailing sales@engsup.com.au.
Cembre Hand ToolsCembre HN-A25 Mechanical Crimping Tool 10–25mm²
Cembre HN-A25 Mechanical Crimping Tool from the CRIMPSTAR® range for crimping Cembre A-M terminals and L-M and L-P non-insulated copper connectors from 10 to 25mm².
The compact manual crimper produces a hexagonal crimp and incorporates a factory-set ratchet mechanism to help ensure the crimping cycle is completed before the handles reopen.
P/N: HN-A25
Get a Quote
Contact us for pricing and availability by calling (08) 9258 8444 or emailing sales@engsup.com.au.
Cembre Hand ToolsCembre HP3 Crimpstar Mechanical Crimping Tool
Cembre HP3 Crimpstar Mechanical Crimping Tool for pre-insulated electrical connectors from 0.25 to 6 mm². Features treated steel crimping jaws, a factory-set ratchet for controlled crimp completion and an emergency release lever.
Compact, lightweight and ideal for professional electrical termination work.
Get a Quote
Contact us for pricing and availability by calling (08) 9258 8444 or emailing sales@engsup.com.au.
