Shop Electrical Supplies Online
Showing 449–464 of 491 resultsSorted by popularity
Raytech Casting JointsRaytech Magic Joint Y – Branch Cable Joint
Raytech Magic Joint Y is an IP68 Y-branch cable joint for 0.6/1kV extruded cables.
The system uses a tough two-piece enclosure filled with fast-setting Raytech Magic Gel, creating a sealed yet re-enterable branch connection for pits, ducts, direct burial and submerged installations.
Available in three stocked sizes for copper conductors, with through conductor sizes up to 400mm² and branch conductors up to 240mm².
Voltage: 0.6/1kV
Protection: IP68
P/N: MAGICJY- Raytech Casting Joints
Raytech Magic Box – IP68 Gel-Filled Connection Box
Raytech Magic Box is a complete IP68 electrical connection box kit supplied with Raytech Magic Fluid insulating gel, cable glands and closing plugs.
The gel-filled enclosure protects electrical connections from water, moisture and dust while remaining re-enterable for future inspection or maintenance.
Suitable for underground, outdoor and submerged installations, with seven box sizes available.
Protection: IP68
P/N: MAGICBOX - Raytech Pre-Filled Joints
Little Joint
Indeed, Little Joint is a small Raytech pre-filled gel joint for single cable connections in confined spaces.
Specifically, it comes in 2 size variants: Barney (6.0–10mm cable) and Fred (8.0–13mm cable).
Also, Engineering Supplies stocks each variant singly or in a 10-piece multi-pack.
P/N: LITTLE
- Raytech Pre-Filled Joints
King Joint
Indeed, King Joint is a Raytech pre-filled gel joint covering both straight cable joints and through/branch tap connections.
Specifically, it comes in 5 sizes: straight joints for cable diameters from 20.5mm to 31mm, and tap joints up to 26mm through / 18.5mm branch.
Also, both configurations use the same pre-filled gel housing principle.
P/N: KING
- Raytech Pre-Filled Joints
Happy Joint
Indeed, Happy Joint is a Raytech pre-filled gel joint for through and branch cable connections in one housing.
Specifically, 4 through/branch combinations are available, supplied in packs of 1 to 4 pieces.
Also, the combination code identifies the number of through cables and branch or in/out connections.
P/N: HAPPYJOINT
- Wiring Duct
KSS Soft Wiring Duct
This product is a flexible, enclosed cable duct for routing cables where a rigid slotted duct is not suitable.
- For example, routing cables around corners or obstructions a rigid duct cannot follow
- Also, jobs needing a flexible, enclosed cable-management solution inside a panel
- In particular, retrofitting cable management into an existing enclosure with limited straight runs
SKU: SDSRD
- Spiral Wrapping
KSS Spiral Wrapping Band (Natural)
KSS natural spiral wrapping band groups wires and electrical harnesses into a flexible bundle. The reusable polyethylene wrap cuts to length and comes in eight catalogue sizes, supplied in 10 m packs.
SKU: KSN
Get a Quote
Contact us for pricing and availability by calling (08) 9258 8444 or emailing sales@engsup.com.au. - Spiral Wrapping
KSS Spiral Wrapping Band (Black)
KSS black spiral wrapping band organises cables and electrical harnesses into a flexible bundle. This reusable polyethylene band cuts to length and is listed in seven sizes, with 10 m packs.
SKU: KSBK
Get a Quote
Contact us for pricing and availability by calling (08) 9258 8444 or emailing sales@engsup.com.au. - Sleeving
Expandible Sleeving
This sleeving is an expandable braided sleeve for cable bundling and mechanical protection, suited to jobs where flexibility and mechanical protection matter more than electrical insulation.
- For example, bundling multiple cables together for mechanical protection
- Also, jobs where flexibility matters more than electrical insulation
- In particular, protecting cable bundles from abrasion in machinery or equipment
P/N: ES
- Corrlok Conduit and Fittings
Nylon Locknuts
This product is a nylon locknut for securing Corrlok conduit fittings, listed by thread size paired to conduit outside diameter.
- For example, securing a fitting in place at a cable entry point
- Also, matching this locknut to the correct fitting thread for a complete assembly
- In particular, jobs assembling a full conduit run from individual components
P/N: LN26
- Corrlok Conduit and Fittings
Corrlok Medium Duty Conduit 90 Degree Fittings
This product is a 90-degree, medium-duty conduit fitting for changing direction at a cable entry point, available in IP66 or IP68.
- For example, changing the direction of a conduit run at a cable entry point
- Also, choosing IP68 where a higher level of ingress protection is specified
- In particular, matching this fitting to the correct locknut for a complete assembly
P/N: CLCM90
- Cable Ties
KSS In-Line Cable Ties
Specifically, see the table above for the exact size, colour and price of each available variant.
P/N: FCV
- Cable Markers
KSS Self Adhesive Wire Markers (symbol)
KSS wire markers symbol (KSS Self Adhesive Wire Markers) are self adhesive labels for identifying wires, cables and equipment.
Specifically, the plus and hyphen symbols are available in sheets of 50, so installers can stock the characters they use most often.
P/N: WMPLUS
Pack Size: 50 per sheet - Cable Markers
KSS Self Adhesive Wire Markers (A-Z)
KSS wire markers letters (KSS Self Adhesive Wire Markers A–Z) are self adhesive labels for identifying wires, cables and equipment.
Specifically, individual letters A–Z are available in sheets of 50, so installers can stock the characters they use most often.
P/N: WMA
Pack Size: 50 per sheet - Cable Glands
CMP A2F Globally Approved, Explosive Atmosphere Cable Gland
Explosive Atmosphere Cable Gland is a globally approved cable gland for explosive-atmosphere installations, in M20 to M90 threads.
P/N: CMPA2F
- Cable Glands
CMP CWD Single Seal Industrial Cable Gland with Deluge Seal
CMP CWD Deluge Gland is a single-seal industrial cable gland with a deluge sealing arrangement, in M20 to M90 threads.
P/N: CMPCWD
