Line Hardware
Overhead line hardware for electrical utility and power distribution applications, including conductor clamps, clevis fittings, eye bolts, stay hardware, suspension fittings and related components.
Browse the available line hardware below or contact Engineering Supplies for product selection and technical support.
Showing 1–16 of 18 resultsSorted by popularity
Line HardwareAluminium Angle Clamp for Aluminum Based Conductors
Aluminium angle clamp for aluminium-based conductors, with an aluminium alloy body and galvanised steel hardware.
- DULBA21010: listed conductor diameter 6.0–16.0 mm.
- DULBA21013: confirm conductor diameter range before ordering.
- Bolt hardware; listed minimum failing load 34 kN.
The failing-load figure is not a working load limit. For help checking the correct size and connection, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Galvanised Eye Bolt & Nut
Galvanised eye bolt and nut in 31 M16, M20 and M24 size options. Compare bolt size, listed length and EBM part number to select the required combination.
Choose a variant to view its price and order. For help with dimensions or supply, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Clevis Thimble
Aluminium clevis thimbles for aluminium and aluminium clad steel deadends. Choose PLPACT-27-16 with a 70 kN catalogue load figure or PLPACT-37-16 with an 80 kN figure. Both have galvanised steel pins and stainless steel split pins.
The image is representative. Confirm the ACT-37-16 bend radius and required grip fit before ordering. Call (08) 9258 8444 for help.
- Line Hardware
Galvanised Bolt & Nut
Galvanised bolt and nut in 51 M12, M16, M20 and M24 size options. Match the BN part number, bolt size and listed length to your parts list.
Choose the required variant to view its price and order. For specification or supply enquiries, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Stay Anchor Plate
Stay anchor plate in M20 or M24 stud options. Both plates measure 300 × 300 × 12 mm: SAP300M20 for M20 and SAP300M24 for M24.
Select your stud size to view the price and order. For specification or supply enquiries, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Screw Anchor Rod (Stay Rod)
M24 stay rod, stock code ANCHOR-ROD-24, with 2140 mm overall length and 60 mm thread length.
Match the dimensions and required fittings to your assembly drawing. Confirm any supplied hardware requirements with Engineering Supplies on (08) 9258 8444.
- Line Hardware
Socket Tongue
ST70 socket tongue with a cast iron body, M16 bolt size and 70 kN minimum failing load. Catalogue dimensions include a 16 mm ball connection and an 18 mm tongue hole.
Order stock SKU DULST70. The standard catalogue fitting uses a W clip; contact us if a different clip is required. For selection help, call (08) 9258 8444.
- Line Hardware
Wire Rope Thimble – Closed
Wire rope thimble with two listed size options:
- PLPGTO22: 15 mm bend radius and 13 mm seat width.
- DULGTO2025: 20 mm bend radius and 18 mm seat width.
The listing says closed, while the photo shows open ends. Confirm the required form, stock item and rope fit before ordering. Call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Clevis Suspension Clamps for Aluminium Based Conductors
Clevis suspension clamps for aluminium based conductors, with aluminium alloy bodies and galvanised steel hardware. Choose from 7–21 mm bolt or rivet models, a 12–28 mm bolt model, or a 20–32 mm bolt model.
Minimum failing loads are 44, 40 or 70 kN according to the model. Allow for any fitted conductor rods when checking diameter. Select the required variation below, or call (08) 9258 8444 for help.
- Line Hardware
Stay Bows
Stay bows in two bolt sizes, with galvanised cast iron listed as the catalogue material.
- STAYBOWM20: 20 mm bolt size.
- STAYBOWM24: 24 mm bolt size.
Check the required size, adjoining fittings and project requirements before ordering. For help with dimensions or load requirements, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Turnbuckle – Clevis/Clevis
TBCC-160-1 clevis clevis turnbuckle in galvanised forged steel. This M20 model has a listed range of 480–600 mm and a catalogue load figure of 160 kN.
Order stock SKU PLPTBCC-160-1. Check the mating fittings and required duty against the assembly design. For help, call (08) 9258 8444.
- Line Hardware
Suspension Trunnion Clamp
SCAT-2838-A suspension trunnion clamp for aluminium based conductors. PLP lists a 28–38 mm conductor range, cast aluminium body and hot dip galvanised fasteners.
The -A code denotes the assembly with suspension straps. The photo shows clamp detail; confirm the supplied strap arrangement before ordering. Call (08) 9258 8444 for help.
- Line Hardware
Ball Hook Short Shank
BHSS70 short shank ball hook in forged steel, with a 16 mm ball connection, 20 mm hook opening and 70 kN minimum failing load.
Order stock SKU DULBHSS70. Check the mating fitting and required duty against your line drawing. For selection help, call (08) 9258 8444.
- Line Hardware
Galvanised Stay Wire
Galvanised stay wire in six seven-wire and nineteen-wire constructions. Compare the stranding and listed overall diameters to select the required part number.
Please confirm the selling unit and available lengths before ordering. For help, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Clevis Tongue Twisted
Twisted clevis tongue fittings in forged steel. Choose DULCTT70A with a 16 mm bolt and 70 kN minimum failing load, or DULCTT160A with a 20 mm bolt and 160 kN minimum failing load.
Compare the mating connection sizes and required orientation before ordering. For selection help, call (08) 9258 8444.
- Line Hardware
Clevis Tongue
Clevis tongue fittings in galvanised cast iron with M16 bolt size. Choose PLPTC-070-1 with a 70 kN catalogue load figure or PLPTC-120-1 with a 120 kN catalogue load figure.
Both options have an 18 mm tongue hole. Check the required rating and mating connection dimensions against the assembly drawing. For help, call (08) 9258 8444.
