Overhead & Underground
Showing 49–64 of 73 resultsSorted by popularity
Wire AccessoriesFour Eye Hose Restraint Galvanised
Four-Eye Hose Restraint (Galvanised) is a woven wire mesh restraint for securing a hydraulic or pneumatic hose to fixed anchor points along its length.
Available in half-metre length increments from 0m to 20m.
P/N: HR4E
- Wire Accessories
Two-Eye Hose Restraint Stainless Steel
Two-Eye Hose Restraint (Stainless Steel) is a woven wire mesh restraint for securing a hydraulic or pneumatic hose to a fixed anchor point.
Available in fifteen size bands from 6mm to 300mm hose outside diameter.
P/N: HR2SS
- Overhead Line Accessories
Eye Nuts
Galvanised steel eye nuts for a matching threaded fitting. DULEN16 has an M16 thread and 30 mm thread length; DULEN20 has an M20 thread and 40 mm thread length.
Select your size to view the price and order. For help checking dimensions or supply, call (08) 9258 8444 or email sales@engsup.com.au.
- Overhead Line Accessories
Hook Bolts
IBH hook bolts with a shaped locating plate, supplied nut and washer. Choose from five M16 and M20 options with 250–450 mm mounting lengths and a 150 mm thread length.
Select the required variant to view its price and order. For help, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Galvanised Stay Wire
Galvanised stay wire in six seven-wire and nineteen-wire constructions. Compare the stranding and listed overall diameters to select the required part number.
Please confirm the selling unit and available lengths before ordering. For help, call (08) 9258 8444 or email sales@engsup.com.au.
- Low Voltage ABC Fittings
Fused Switch Disconnects (Pole Fuse)
This product is a fused switch disconnect, or pole fuse, for low voltage aerial bundled cable, available as a single unit or as a 4-fitting gang assembly.
- For example, switching and protecting an individual low voltage ABC service or mains connection
- Also, jobs needing four fittings mounted together as one gang assembly
- In particular, low voltage aerial bundled cable distribution and service work
SKU: K292
- Line Fittings
Spiral Vibration Dampers
PLP spiral vibration dampers help reduce wind-induced conductor vibration at supports and deadend positions. The high-impact, UV-resistant PVC construction resists corrosion.
- SVD-0104: 8.30–11.74 mm, black code
- SVD-0105: 11.75–14.30 mm, yellow code
- SVD-0106: 14.31–19.30 mm, green code
Confirm the conductor size, span length and line conditions before ordering. Standard quantity guidance appears below; exposed crossings, high tensions and aerial warning spheres need specific recommendations.
- Line Fittings
Aluminium Armour Rods for AAC, AAAC, and ACSR Conductors
PLP aluminium armour rods reinforce and protect AAC, AAAC and ACSR overhead conductors where they pass through supports and fittings.
- Options: AAR-143, AAR-163, AAR-175, AAR-188, AAR-210 and AAR-240
- Listed conductor diameters: 14.00 to 24.79 mm
- Blue, orange, red or black identification marks
Match the confirmed conductor diameter and colour code before ordering, since several diameter bands sit close together.
- Line Fittings
Conductor Line Splice for AAC, AAAC Conductors
AFS conductor line splices join or repair suitable AAC and AAAC overhead conductors. Choose the exact fitting from the five strand constructions below.
- Options: AFS-090, AFS-143, AFS-163, AFS-175 and AFS-188
- Listed conductor diameters: 9.00, 14.25, 16.25, 17.50 and 18.75 mm
- Part-specific red, blue, orange or black identification marks
Match the conductor and required joint performance before ordering. PLP requires confirmation for any ACSR application; the AAC/AAAC size table does not establish ACSR suitability.
- Line Fittings
Distribution Side Ties Over Bare Conductor for AAC, AAAC, and ACSR
PLP distribution side ties secure AAC, AAAC and ACSR conductors directly over bare conductor at distribution line supports.
- Options: AWST-075, AWST-140 and AWST-180
- Listed conductor diameters: 7.04 to 19.19 mm
- Blue or black identification marks
Confirm the tie is for a bare-conductor position rather than an armour rod arrangement before ordering.
- Line Fittings
Distribution Ties for Aluminium Based Armour Rods
PLP distribution ties secure aluminium based conductors at support positions where an armour rod is already fitted.
- Options: AWDT-210A, AWDT-220A, AWDT-240A, AWDT-255A and AWDT-290A
- Listed diameters: 11.25 to 18.75 mm
- This range does not list a colour code; identify the fitting by its full part number
Confirm the armour rod outside diameter, not the bare conductor diameter, before ordering.
- Line Fittings
Distribution Ties for Aluminium Based Conductors
PLP distribution ties secure aluminium based conductors directly at distribution line support positions.
- Options: AWDT-075-76 through AWDT-240-76, eight sizes in total
- Listed conductor diameters: 7.04 to 24.59 mm
- Blue, red, black or orange identification marks
Several diameter bands sit close together, so confirm the exact conductor diameter and colour code before ordering.
- Line Fittings
Aluminium Based Deadends for ACSR Conductors – Multi Piece – Full Tension
PLP FTG multi-piece ACSR deadend grips provide full tension terminations for specified aluminium conductors with steel reinforcement.
- Five options: FTG-113, FTG-143, FTG-175, FTG-210 and FTG-245
- Conductor diameters from 11.25 to 24.50 mm, matched to the listed strand construction
- Red, blue or purple identification marks, depending on the part
Check the full part number, stranding and lay before ordering. Colours repeat across sizes, so use the selection table below to confirm the required option.
- Line Fittings
Aluminium Based Deadends for ACSR Conductors – Single Piece
PLP AWFG single-piece ACSR deadends suit the specific conductor constructions listed in the selection table below.
- Four options: AWFG-075-X, AWFG-090-X, AWFG-113-X and AWFG-143-X
- Conductor diameters: 7.50, 9.00, 11.25 and 14.30 mm
- Blue, red or black identification marks
Match the full part number, conductor stranding and lay direction. Confirm the required tension duty and attachment hardware before ordering.
- Overhead Line Accessories
Cross Arms Mounting Blocks – Gain Blacks
Cast aluminium alloy gain blocks with a crossarm locating groove. Select DULGB100, DULGB125 or DULGB150 for the listed 100, 125 or 150 mm crossarm size.
Choose the matching option to view its price and order. For mounting or supply enquiries, call (08) 9258 8444 or email sales@engsup.com.au.
- Overhead Line Accessories
Cross Arms Brace
Galvanised high-strength steel crossarm braces, 50 mm wide and 6 mm thick. XABRA04 has 800 mm hole centres; XABRA06 has 1,000 mm hole centres.
Choose the matching part number to view its price and order. For help, call (08) 9258 8444 or email sales@engsup.com.au.
