Shop Electrical Supplies Online
Showing 337–352 of 491 resultsSorted by popularity
Bolted Connections & TerminalsParalel Clamp (Type AUP – for aluminium only)
Dulmison AUP112 parallel clamp is for aluminium conductors only. It has a cast aluminium alloy body and stainless steel hardware, with an 18.80–29.30 mm run range and an 11.30–21.00 mm tap range by overall conductor diameter.
Ordering SKU: DULAUP112. Check the separate stranding ranges below before selecting the clamp.
- Bolted Connections & Terminals
Aluminium Bail Clamp (Type ABC)
ABC5-2 aluminium bail clamp has an ABC5 series body, aluminium hardware and a copper loop for overhead line connections. It suits 6.75–18.80 mm overall conductor diameters and comes pre-filled with Alminox.
Part number: ABC5-2 · Product group SKU: ABC.
- Line Hardware
Clevis Suspension Clamps for Aluminium Based Conductors
Clevis suspension clamps for aluminium based conductors, with aluminium alloy bodies and galvanised steel hardware. Choose from 7–21 mm bolt or rivet models, a 12–28 mm bolt model, or a 20–32 mm bolt model.
Minimum failing loads are 44, 40 or 70 kN according to the model. Allow for any fitted conductor rods when checking diameter. Select the required variation below, or call (08) 9258 8444 for help.
- Line Hardware
Stay Bows
Stay bows in two bolt sizes, with galvanised cast iron listed as the catalogue material.
- STAYBOWM20: 20 mm bolt size.
- STAYBOWM24: 24 mm bolt size.
Check the required size, adjoining fittings and project requirements before ordering. For help with dimensions or load requirements, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Turnbuckle – Clevis/Clevis
TBCC-160-1 clevis clevis turnbuckle in galvanised forged steel. This M20 model has a listed range of 480–600 mm and a catalogue load figure of 160 kN.
Order stock SKU PLPTBCC-160-1. Check the mating fittings and required duty against the assembly design. For help, call (08) 9258 8444.
- Earth Rod Clamps
Type GF
Type GF earth clamp connects one earth conductor to flat metal. It combines a cast copper alloy body with stainless steel hardware.
Choose ER-GF42 for 16–70 mm² conductors (5.10–10.70 mm diameter), or ER-GF58 for 70–135 mm² conductors (10.70–15.25 mm diameter).
- Line Hardware
Suspension Trunnion Clamp
SCAT-2838-A suspension trunnion clamp for aluminium based conductors. PLP lists a 28–38 mm conductor range, cast aluminium body and hot dip galvanised fasteners.
The -A code denotes the assembly with suspension straps. The photo shows clamp detail; confirm the supplied strap arrangement before ordering. Call (08) 9258 8444 for help.
- Line Hardware
Ball Hook Short Shank
BHSS70 short shank ball hook in forged steel, with a 16 mm ball connection, 20 mm hook opening and 70 kN minimum failing load.
Order stock SKU DULBHSS70. Check the mating fitting and required duty against your line drawing. For selection help, call (08) 9258 8444.
- Overhead Line Insulators
Fibreglass Stay insulator
NEE220N1630H fibreglass HV stay insulator with eye/eye end fittings and arcing horns. Listed minimum failing load 220 kN and arcing distance 1094 mm. Order SKU: DULNEE220N1630H.
Choose a quantity to order or request a quote. For supply help, call (08) 9258 8444 or email sales@engsup.com.au.
- Low Voltage ABC Fittings
Service Strain Clamps
Service strain clamps for low-voltage ABC: DULIBST435-2 has a detachable bail for 2–4 cores, 4–35 mm²; DULIBTH21635 is a hook type for 2 cores, 16–35 mm².
Select by SKU and clamp form; the shared long-strap variation photo does not show these designs. For ordering or quote help, call (08) 9258 8444 or email sales@engsup.com.au.
- Low Voltage ABC Fittings
Mains Strain Clamps
IBT mains strain clamps for low-voltage ABC. DULIBT25095 suits 2 cores and DULIBT5095 suits 4 cores, both at 50–95 mm². DULIBT95150 is a 4-core model; confirm its cable range before ordering because catalogue values differ.
Select the exact SKU to order or request a quote. For cable matching or supply help, call (08) 9258 8444 or email sales@engsup.com.au.
- Low Voltage ABC Fittings
Insulation Piercing Connectors
Insulation piercing connectors for insulated-to-insulated LV ABC connections using aluminium or copper conductors. Choose K440, K441, K442, K443 or K445 by both run and tap cable range.
All five models use one shear-head bolt. Select the exact DULK SKU to order or request a quote. For help, call (08) 9258 8444 or email sales@engsup.com.au.
- Wire Accessories
Lace-up Cable Stocking Stainless Steel
Lace-up Cable Stocking (Stainless Steel) is a woven wire mesh grip for pulling or supporting a cable under tension.
Available in twelve size bands from 6.0mm to 180mm cable diameter.
P/N: CSLUSS
- Wire Accessories
Lace-up Cable Stocking Galvanised
Lace-up Cable Stocking (Galvanised) is a woven wire mesh grip for pulling or supporting a cable under tension.
Available in twelve size bands from 6.0mm to 180mm cable diameter.
P/N: CSLU
- Wire Accessories
Open Ended Stocking Stainless Steel
Open Ended Cable Stocking (Stainless Steel) is a woven wire mesh grip for pulling or supporting a cable under tension.
Available in twelve size bands from 6.0mm to 180mm cable diameter.
P/N: CSOPESS
- Wire Accessories
Open Ended Stocking Galvanised
Open Ended Cable Stocking (Galvanised) is a woven wire mesh grip for pulling or supporting a cable under tension.
Available in twelve size bands from 6.0mm to 180mm cable diameter.
P/N: CSOPE
