Shop Electrical Supplies Online
Showing 97–112 of 491 resultsSorted by popularity
ScrewdriversSZS 0,6X3,5
The Phoenix Contact SZS 0,6X3,5 is an insulated actuation tool for ST terminal blocks that also serves as a slotted screwdriver. It has a 0.6 × 3.5 × 100 mm blade, two-component handle and 181 mm overall length. Manufacturer part 1205053.
- Earth Rod Pits
ERB1 Aluminium Connection Box
ERB1 aluminium connection box (DULERB1) encloses the earth rod connection. It has a hinged inspection lid, side cable entry holes and space for conductors and clamps.
Please confirm the required dimensions and installation load requirements with our team before ordering.
- Bolted Connections & Terminals
Bolted Cable Lugs
Type Q bolted cable lugs with a brass clamp body and nut. A single nut secures the conductor, and the lug can be disconnected and reused.
- Round mounting hole in the lug palm.
- Multiple conductor and mounting bolt sizes.
- Check cable cross-section and diameter before ordering.
H1806 and H1806A: please contact us to confirm the part number and conductor size before purchase. Call (08) 9258 8444 or email sales@engsup.com.au.
- Utilux Crimping Tools
Utilux UT#102 Crimper – Red, Blue & Yellow Terminals
Utilux UT#102 Ratchet Crimping Tool for red, blue and yellow pre-insulated terminals, including Utilux standard and SuperGrip terminals.
Suitable for conductors from 0.5 to 5.5mm², the #102 crimper produces an oval crimp on the conductor and a diamond crimp on the insulation.
Ideal for electrical installation, switchboard building, maintenance and general termination work.
Utilux References: UT#102 / #102 / UT-102
- High Temperature Cable
Single Core Siltherm Cable
This cable is a yellow single-core high temperature cable spanning 1.5mm² to 120mm², with per-metre pricing.
- For example, installations already using a Siltherm-marked cable, where a matching replacement length is needed
- Also, jobs specifying a yellow high temperature single-core cable by conductor area
- In particular, sites needing conductor areas up to 120mm² in this range
P/N: SILTH
- Cable Tie Mounts
KSS Self Adhesive Tie Mount
This product is a self-adhesive fixing point for cable ties, listed by base size with its cable tie window.
- For example, fixing points on a flat, clean surface where drilling isn’t wanted
- Also, jobs needing the extra security of a mounting hole in addition to the adhesive base
- In particular, matching the tie window to the cable tie width in use
P/N: HC10
- Cable Markers
Critchley K-Type Cable Markers (symbols)
Critchley K65 symbols (Critchley K-Type Cable Markers) are pre-printed PVC markers for permanent identification of cables, conductors and cable bundles.
Specifically, the K65 range suits cable diameters from 4.2–7.0mm and conductor sizes from approximately 4–10mm². Also, individual symbols (., +, – and /) are available in packs of 500 for use with compatible K-Type marker carrier strips.
P/N: K65PLUS
Pack Size: 500 markers - Overhead Line Insulators
TE Longrod Insulators
Grey TE composite longrod insulators with silicone housing and CT couplings. Choose from three SKUs with listed 70 or 120 kN strain ratings and 1157 or 2120 mm nominal creepage.
Confirm the nominal system voltage for LR-CS120CT425-2120CSG before ordering; 425 kV is its impulse withstand rating. Select the exact SKU to order or request a quote. Call (08) 9258 8444 or email sales@engsup.com.au for help.
- Line Fittings
Aluminium Based Deadends
AFG aluminium deadend grips suit the specified AAC and AAAC conductor constructions. Nine options cover listed conductor diameters from 7.50 to 23.80 mm.
- Part-specific strand and colour-code table below
- PLP drawing dimensions for eight CL options
- Match conductor lay, fitting code and required holding duty
Selection notes: Photos show a representative orange-marked grip. Use the specified part number and colour code. Confirm any ACSR application and do not substitute AFG-238-CL with AFG-240-LT-CL based on diameter alone.
- Line Hardware
Clevis Thimble
Aluminium clevis thimbles for aluminium and aluminium clad steel deadends. Choose PLPACT-27-16 with a 70 kN catalogue load figure or PLPACT-37-16 with an 80 kN figure. Both have galvanised steel pins and stainless steel split pins.
The image is representative. Confirm the ACT-37-16 bend radius and required grip fit before ordering. Call (08) 9258 8444 for help.
- Cleaners
Daily Countertop Cleaner (Previously known as Rejuvenata Spray)
Indeed, the daily countertop cleaner is a DryTreat Stain Proof product, previously Rejuvenata Spray. It provides a separate option for routine benchtop cleaning, alongside the daily floor cleaner in this range.
- Routine daily cleaning of benchtops and countertops
- Suitable hard surfaces used in kitchens and similar areas
- Regular upkeep between deeper cleaning treatments
Available in 16oz/473ml.
- Varnishes & Thinners
Ultimeg 2000/372 Varnish
This product is an electrical varnish for motor rewind and repair coating, available in four colours.
- For example, motor rewind and repair work needing a coating in a specific colour
- Also, jobs specifying the red grade in bulk, in 5L or 25L drums, rather than the 400ml spray
- In particular, general electrical winding and insulation coating work
P/N: ULT372
- Flexible Cable
Single Core Flexible 250/440V Cable
Single Core Flexible 250/440V Cable (FVT) is a lighter-duty single-conductor cable for lower-voltage equipment and control wiring.
- 0.5mm² and 0.75mm² sizes
- 250/440V voltage rating
- 12 core colours, including Green/Yellow earth
- Sleeving
Vidaflex SD550 Silicone Glass Sleeving
Vidaflex SD550 Silicone Glass Sleeving provides flexible high-temperature electrical insulation for cables, winding leads and electrical equipment.
The sleeving uses a braided E-glass fibre core with a smooth silicone elastomer coating, providing Class H insulation for continuous operation from -60°C to +180°C, with short-term exposure up to 250°C.
Available from 2mm to 25mm internal diameter.
Electrical Strength: 4.0kV
Temperature Class: Class H / 180°C
P/N: SRGS - Utilux Copper Lugs & Links
Copper Flared Lugs (Bell Mouth)
Copper Flared Lug is a copper lug with a bell-mouth entry for easier cable insertion, in 50mm² to 150mm² sizes.
P/N: CGFL
- Utilux Terminals
Supergrip Crimp Link Connectors
Utilux Supergrip Crimp Link Connectors join two conductor ends inside one insulated barrel, using a heavier-duty crimp barrel for extra pull-out strength on a permanent splice.
Available colour-coded across the full range: Red 0.5mm²–1.5mm², Blue 1.5mm²–2.5mm², Yellow 2.5mm²–6.0mm².
P/N: USICLC
