Overhead & Underground
Showing 17–32 of 73 resultsSorted by popularity
Line HardwareStay Anchor Plate
Stay anchor plate in M20 or M24 stud options. Both plates measure 300 × 300 × 12 mm: SAP300M20 for M20 and SAP300M24 for M24.
Select your stud size to view the price and order. For specification or supply enquiries, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Screw Anchor Rod (Stay Rod)
M24 stay rod, stock code ANCHOR-ROD-24, with 2140 mm overall length and 60 mm thread length.
Match the dimensions and required fittings to your assembly drawing. Confirm any supplied hardware requirements with Engineering Supplies on (08) 9258 8444.
- Overhead Line Insulators
Aerodynamic Line Pin
Porcelain aerodynamic line pin insulators in 11, 22 and 33 kV options with Pattern C threads. Select DULALP-11-275, DULALP-22-450 or DULALP-33-920 to match the required creepage and pin reference.
Choose the exact SKU to order or request a quote. For fitting or supply help, call (08) 9258 8444 or email sales@engsup.com.au.
- Wire Accessories
Single Eye Cable Stocking Galvanised
Single Eye Cable Stocking (Galvanised) is a woven wire mesh grip for pulling or supporting a cable under tension.
Available in twelve size bands from 6.0mm to 180mm cable diameter.
P/N: CSSE
- Line Hardware
Socket Tongue
ST70 socket tongue with a cast iron body, M16 bolt size and 70 kN minimum failing load. Catalogue dimensions include a 16 mm ball connection and an 18 mm tongue hole.
Order stock SKU DULST70. The standard catalogue fitting uses a W clip; contact us if a different clip is required. For selection help, call (08) 9258 8444.
- TE Cable Clamps/Cleats
TE Cable Cleats (Single)
This product is a single-cable product for individual cable support, available in seven cable-diameter bands, mostly with SN mounting.
- For example, supporting an individual cable on an overhead or underground run
- Also, jobs needing a specific diameter band to match the finished cable outside diameter
- In particular, installations needing FM rather than SN mounting on the two bands where it’s offered
SKU: TECC
- Overhead Line Insulators
Guy Strain Insulators
Porcelain LV guy strain insulators in GY2, GY3 and GY4 options. Overall lengths are 146, 216 and 280 mm respectively; minimum failing loads are 71, 222 and 222 kN.
Select the exact DULGY SKU to view its price and order. For selection or supply help, call (08) 9258 8444 or email sales@engsup.com.au.
- Wire Accessories
Two-Eye Hose Restraint Galvanised
Two-Eye Hose Restraint (Galvanised) is a woven wire mesh restraint for securing a hydraulic or pneumatic hose to a fixed anchor point.
Available in fifteen size bands from 6mm to 300mm hose outside diameter.
P/N: HR2
- Line Hardware
Wire Rope Thimble – Closed
Wire rope thimble with two listed size options:
- PLPGTO22: 15 mm bend radius and 13 mm seat width.
- DULGTO2025: 20 mm bend radius and 18 mm seat width.
The listing says closed, while the photo shows open ends. Confirm the required form, stock item and rope fit before ordering. Call (08) 9258 8444 or email sales@engsup.com.au.
- Bolted Connections & Terminals
Service Tee Connectors (Type STC)
Dulmison STC110-3 service tee connector is used with a B24 line tap for copper-to-aluminium service connections. It has galvanised steel hardware, a 7/2.75 copper conductor and a total length of 385 mm.
Run conductor range: 7/2.50–19/3.75 · Ordering SKU: DULSTC110-3.
- Bolted Connections & Terminals
Parallel Clamp (Type KA)
KA parallel clamp for heavy-duty service connections, with a copper alloy body, stainless steel hardware and neoprene bolt-retaining rings.
Choose KA2, KA3, KA4 or KA5 from the table. Each model has separate run and tap conductor ranges; check both before ordering.
- Bolted Connections & Terminals
Paralel Clamp (Type AUP – for aluminium only)
Dulmison AUP112 parallel clamp is for aluminium conductors only. It has a cast aluminium alloy body and stainless steel hardware, with an 18.80–29.30 mm run range and an 11.30–21.00 mm tap range by overall conductor diameter.
Ordering SKU: DULAUP112. Check the separate stranding ranges below before selecting the clamp.
- Bolted Connections & Terminals
Aluminium Bail Clamp (Type ABC)
ABC5-2 aluminium bail clamp has an ABC5 series body, aluminium hardware and a copper loop for overhead line connections. It suits 6.75–18.80 mm overall conductor diameters and comes pre-filled with Alminox.
Part number: ABC5-2 · Product group SKU: ABC.
- Line Hardware
Clevis Suspension Clamps for Aluminium Based Conductors
Clevis suspension clamps for aluminium based conductors, with aluminium alloy bodies and galvanised steel hardware. Choose from 7–21 mm bolt or rivet models, a 12–28 mm bolt model, or a 20–32 mm bolt model.
Minimum failing loads are 44, 40 or 70 kN according to the model. Allow for any fitted conductor rods when checking diameter. Select the required variation below, or call (08) 9258 8444 for help.
- Line Hardware
Stay Bows
Stay bows in two bolt sizes, with galvanised cast iron listed as the catalogue material.
- STAYBOWM20: 20 mm bolt size.
- STAYBOWM24: 24 mm bolt size.
Check the required size, adjoining fittings and project requirements before ordering. For help with dimensions or load requirements, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Hardware
Turnbuckle – Clevis/Clevis
TBCC-160-1 clevis clevis turnbuckle in galvanised forged steel. This M20 model has a listed range of 480–600 mm and a catalogue load figure of 160 kN.
Order stock SKU PLPTBCC-160-1. Check the mating fittings and required duty against the assembly design. For help, call (08) 9258 8444.
