Shop Electrical Supplies Online
Showing 49–64 of 491 resultsSorted by popularity
Heat ShrinksRaychem WCSM Heavy Wall Heat Shrink Tubing
Raychem WCSM Heavy Wall Heat Shrink Tubing provides robust electrical insulation, sealing and mechanical protection for power cables and cable accessories.
Manufactured from UV-stabilised cross-linked polyolefin, WCSM offers a greater than 3:1 shrink ratio and suits low-voltage insulation as well as sealing and rejacketing on low-, medium- and high-voltage cable systems.
Available in a wide range of sizes from WCSM16/4 to WCSM180/50.
P/N: WCSM
- Flexible Cable
Single Core Flexible 0.6/1kV Cable 0.5-6mm2
Single Core Flexible 0.6/1kV Cable 0.5-6mm² (FVK) is a single-conductor flexible cable for switchboard, control panel and general equipment wiring.
- 0.5mm² to 6mm² sizes
- 0.6/1kV voltage rating
- 12 core colours, including Green/Yellow earth
- Raytech Fillers – Electrical Insulating & Sealing Compounds
Raytech Magic Gel – Electrical Insulating & Sealing Gel
Raytech Magic Gel is a two-component electrical insulating and sealing gel for cable joints, junction boxes and electrical enclosures.
Its low-viscosity formula flows around conductors and components before cross-linking, while the cured gel remains re-enterable for future maintenance.
Provides IP68 protection when used in a suitable enclosure, with dielectric strength above 20kV/mm and an operating temperature range from -60°C to +200°C.
Available in 300ml, 1L, 2L and 10L sizes.
P/N: MAGIC
- Liquatite Conduit and Fittings
Premium Grade Liquid Tight Ferrules
This product is a ferrule for terminating this range’s conduit, listed by conduit size.
- For example, terminating the matching conduit at a fitting or enclosure
- Also, matching this ferrule to the correct locknut for a complete assembly
- In particular, jobs assembling a full conduit run from individual components
P/N: LTF
- Tension Sleeves
Non-Tension Sleeve
Utilux non-tension sleeves suit AAC, AAAC and ACSR conductor joints in overhead and underground installations. The aluminium alloy body includes a centre barrier and comes pre-packed with jointing compound.
- Store options: NT44-1, NT50-1 and NT61-1
- Conductor diameter ranges from 8–10 to 13–14.5 mm, depending on the option
- Hexagonal or indent crimping with the correct tooling
Selection note: Utilux catalogue codes omit the “-1” suffix. Confirm the full store SKU against your specified part before ordering. Photos are representative; use the confirmed instructions for crimping.
- Earth Rods & Accessories
Earth Rod Clamp GB2
The GB2 earth rod clamp suits one 50–120 mm² conductor and a 13–19 mm diameter earth rod. It allows parallel or right-angle connections and combines a high-copper-content alloy body with stainless steel hardware. Engineering Supplies part ER-GB2.
- Utilux Crimping Tools
UT#00
Utilux UT#00 is a general purpose crimping plier for uninsulated copper lugs and links, covering conductors from 0.5-10mm².
P/N: UT-00
- Split Conduit
Split Conduit
This product is a covering for cables and cable bundles, available in ten inside-diameter sizes, each with its own set of length options.
- For example, covering a cable or wiring bundle along its length
- Also, jobs needing a specific inside diameter to match the bundle being covered
- In particular, longer cable runs needing one of the extended length options
SKU: SC
- Electrical Jointing
Alminox ALM / H2397 Electrical Jointing Compound
Short Description
Alminox ALM / H2397 Electrical Jointing Compound is a conductive compound for aluminium electrical connections.
The same Alminox product is referenced as ALM by Preformed Line Products (PLP) and H2397 by TE Connectivity / Utilux.
It contains conductive zinc particles suspended in a grease base. Under compression, the particles help penetrate aluminium oxide film, while the compound seals the joint against air and moisture.
Recommended for aluminium-to-aluminium bolted and compression connections.
P/N: PLP ALM / TE H2397
- Cleaners
Daily Floor Cleaner (Previously known as Rejuvenata Active)
Indeed, the daily floor cleaner is a DryTreat Stain Proof product, previously Rejuvenata Active. It is an enzyme-based concentrate for floors and other suitable hard surfaces.
- Routine daily cleaning of stone, tile and other hard floors
- Suitable hard surfaces beyond flooring where routine care is needed
- Regular upkeep between deeper cleaning treatments
Available in 1qt/946ml.
- Termco Terminals
Ring Terminals – 2.5 – 6.0mm2 Yellow
Termco Ring Terminals (2.5–6.0mm² Yellow) are crimp terminals for stranded conductors from 2.5 to 6.0mm². Accordingly, they fit stud sizes from 3.7mm to 12mm.
They come in Insulated, Twin Grip Insulated and Uninsulated styles. In particular, ring terminals suit screw or bolted connections where the terminal must not disconnect if the fixing loosens.
P/N: TVR5
- Bolted Connections & Terminals
Split Bolt Clamp (Type B – Line Tap)
Dulmison Type B split bolt clamp is a hard-drawn brass line tap with a natural brass finish. Choose B22, B24, B25, B26 or B28 to suit the listed maximum conductor sizes from 16 to 185 mm².
Each model accommodates two conductors within its stated limits. Check the size table before ordering.
- Utilux Bi-Metal Lugs & Links
Utilux Bi-Metal Crimp Links
Utilux Bi-Metal Crimp Links provide an in-line connection between aluminium and copper conductors.
Manufactured from high-purity aluminium and copper with a friction-welded joint, each link comes pre-filled with jointing compound and individually sealed.
Available in same-size and reducing configurations from 16/10mm² through to 630/630mm².
- Termco Terminals
Ring Terminals – 1.5 – 2.5mm2 Blue
Termco Ring Terminals (1.5–2.5mm² Blue) are crimp terminals for stranded conductors from 1.5 to 2.5mm². Accordingly, they fit stud sizes from 3mm to 12mm.
They come in Insulated, Twin Grip Insulated and Uninsulated styles. In particular, ring terminals suit screw or bolted connections where the terminal must not disconnect if the fixing loosens.
Price is per bag of 100.
P/N: TVR2
- Raytech Fillers – Electrical Insulating & Sealing Compounds
Raytech Wonder Gel – Ready-to-Use Electrical Insulating Gel
Raytech Wonder Gel is a ready-to-use, single-component electrical insulating and sealing gel for cable joints, junction boxes and electrical enclosures.
The gel comes already cross-linked, so there is no mixing and no curing wait time. In addition, it remains soft and re-enterable for future inspection or maintenance.
Provides dielectric strength above 20kV/mm and can contribute to IP68 protection when installed in a suitable enclosure.
Available in 280ml cartridges.
P/N: WONDER / WONDER-INV
- Capacitors
BMI Type 92A AC Motor Start Capacitors
This capacitor is an AC motor start capacitor listed across four voltage bands from 125 Vac to 330 Vac.
- For example, replacing a BMI Type 92A start capacitor by matching the voltage band and capacitance band
- Also, motor start circuits already confirmed as needing a start capacitor rather than a run capacitor
- In particular, 330 Vac jobs where the old part included a resistor
P/N: MSC
