Shop Electrical Supplies Online
Showing 65–80 of 491 resultsSorted by popularity
Utilux TerminalsRing Terminals – 0.5 – 1.5mm2 Red
Utilux Ring Terminals – 0.5–1.5mm², Red are crimp terminals with a closed ring end that bolts onto a stud or screw terminal, keeping the connection secure under vibration and movement.
Available for conductors from 0.5mm² to 1.5mm², colour-coded Red, in Insulated, Supergrip and Uninsulated styles across stud sizes from 1.6mm to 10mm.
P/N: URT1
- Termco Terminals
Dual Cord End Teminals (Boot Lace)
Termco Dual Cord End Terminals (Boot Lace) are crimp ferrules that join two stranded conductors, from 0.5mm² to 16mm² per conductor, into one combined ferrule end.
The twin ferrule slides over both stripped conductors and holds every strand together for insertion into a single spring-cage or screw terminal. Colour-coded to the DIN 46228 standard by conductor size.
P/N: TICE2
- Utilux Terminals
Push On Female Terminals
Utilux Push On Female Terminals are push-on connectors with a female socket end, crimped onto a stripped conductor to mate with a male tab terminal.
Available for conductors from 0.5mm² to 6.0mm², colour-coded Red, Blue and Yellow, in Half and Full insulated styles across a range of tab sizes.
P/N: QCSG
- Raytech Pre-Filled Joints
Gel Cover Line
Indeed, Gel Cover Line is a Raytech pre-filled gel cover that protects housed connector splices for small conductor sizes.
Specifically, 2 connector types are available (Bar 3-way, Ohm 2-way), each for 4–6mm² conductors.
Also, single units and multi-packs of 9 or 11 pieces are both available.
P/N: GEL
- Utilux Terminals
Pre-Insulated Crimp Link Connectors
Utilux Pre-Insulated Crimp Link Connectors join two conductor ends inside one insulated barrel, forming a permanent crimped splice rather than a stud or plug-in connection.
Available colour-coded across the full range: Red 0.5mm²–1.5mm², Blue 1.5mm²–2.5mm², Yellow 2.5mm²–6.0mm².
P/N: UICLC
- Earth Mats
Earth Mat
Galvanised steel earth mat, part ER-EARTHMAT, measuring 1500 × 900 mm. The rectangular framed mesh panel is for use in an earthing installation. Check the dimensions and material against your project specification.
- Line Hardware
Galvanised Eye Bolt & Nut
Galvanised eye bolt and nut in 31 M16, M20 and M24 size options. Compare bolt size, listed length and EBM part number to select the required combination.
Choose a variant to view its price and order. For help with dimensions or supply, call (08) 9258 8444 or email sales@engsup.com.au.
- Termco Terminals
Ring Terminals – 0.5 – 1.5mm2 Red
Termco Ring Terminals (0.5–1.5mm² Red) are crimp terminals for stranded conductors from 0.5 to 1.5mm². Accordingly, they fit stud sizes from 3mm to 12mm.
They come in Insulated, Twin Grip Insulated and Uninsulated styles. In particular, ring terminals suit screw or bolted connections where the terminal must not disconnect if the fixing loosens.
P/N: TVR1
- Bolted Connections & Terminals
Parallel Groove Clamp – Copper
Copper parallel groove clamp for copper-to-copper conductor joints. The forged copper body has serrated grooves, copper bolts, Belleville washers and an oxide inhibitor coating.
- 3029-FS: 6–70 mm²; 20 Nm.
- 3030-FS: 16–95 mm²; 20 Nm.
- 3032-FS: 16–150 mm²; 30 Nm.
Select the required part number and check the conductor diameter before ordering. For help, call (08) 9258 8444 or email sales@engsup.com.au.
- Line Fittings
Galvanised Deadends For Galvanised Conductor and Stays SC/GZ
GFG galvanised deadend grips suit the specified galvanised conductors, guy wires and stays. Choose from nine options using the conductor table below.
- Listed conductor diameters from 4.80 to 18.80 mm
- Part-specific strand constructions and colour codes
- Grip and conductor must have matching lay directions
Use the full part number and conductor details for every size, since colour codes repeat. Confirm the required duty and attachment hardware before ordering.
- Rewinding
Nomex + Mylar + Nomex (NMN) Insulation
Indeed, NMN insulation is a laminated sheet material that sandwiches a polyester film core between two Nomex aramid paper layers, used as slot and phase insulation.
Specifically, 4 laminate combinations (2-2-2, 3-3-3, 3-5-3, 5-5-5) are available, giving thicknesses from 0.15mm to 0.38mm.
Also, pricing is per metre, with a quantity of 1 equal to 1 metre.
P/N: NMN
- Earth Rods & Accessories
Stainless Steel Earth Rod Couplers (316)
316 stainless steel earth rod couplers join matching threaded stainless steel rod sections. Choose ER-SSC16 for a 16 mm (5/8 inch) rod or ER-SSC19 for a 19 mm (3/4 inch) rod. Both cylindrical couplers are 70 mm long.
Product group SKU: ER-SSC.
- Cable Markers
KSS FM Cable Markers (0-9)
KSS FM numbers (KSS FM Cable Markers 0–9) are pre-printed cable markers for identifying cables, conductors and equipment.
Specifically, individual digits 0–9 are available in packs of 500, so installers can stock the characters they use most often.
P/N: FM0
Pack Size: 500 markers - Cable Markers
Critchley K-Type Cable Markers (0-9)
Critchley K65 numbers (Critchley K-Type Cable Markers 0–9) are pre-printed PVC markers for permanent identification of cables, conductors and cable bundles.
Specifically, the K65 range suits cable diameters from 4.2–7.0mm and conductor sizes from approximately 4–10mm². Also, individual digits 0–9 are available in packs of 500 for use with compatible K-Type marker carrier strips.
P/N: K650
Pack Size: 500 markers - Screwdrivers
SZG 0,6X3,5 VDE
The Phoenix Contact SZG 0,6X3,5 VDE is a stepped slotted screwdriver for test socket screws. It has a 0.6 × 3.5 × 100 mm blade and a two-component Kraftform handle. Manufacturer part 1205121; overall length 198 mm.
- Line Fittings
Copper Alloy Deadends for Copper Conductor
CFG copper alloy deadends suit specified hard drawn copper conductors. Choose from six options using the strand construction and diameter table below.
- Options include CFG-0525, CFG-060, CFG-083, CFG-100-CL, CFG-113-CL and CFG-125
- Individual listed conductor diameters from 5.25 to 12.80 mm
- Right-hand lay is standard in the PLP range
Check the conductor’s actual lay and full part number before ordering. Cadmium copper conductors require the appropriate left-hand lay grip. Multi-size entries cover the listed constructions, not every diameter between them.
